LazzurusMan

Yeah it's completely ruined. I've tried at least 6 different cross heads and they've all either spun or jumped out. Guess I'm gonna have to get a new stock tube now then? This £90 gun is starting to look a lot more expensive, and that's before I start putting the upgrades I want into her!

The gun has been fine since I got it, only £90. Just recently this happened. I now have two more problems. While trying to take the stock tube off I caught the wiring and now need to re-solder my deans connector back on (simple, I can do that), and I've also found that the screw that hole the stock tube on has been completely rounded off. I can't undo it. Does anyone know of any way to take the gearbox out with taking the stock tube off?

This is an ex hire gun I got online, and it doesn't move back far enough in auto to fire....most of the time. When it does it'll only fire one shot :/

so this problem started during my first ever time airsofting....wasn't helpful. She fires okay in semi, occasionally I'll pull the trigger and she'll stick a little but that I don't mind too much and I guess is linked to my main problem. I have no full auto. U pull the trigger and I don't even get any life from the battery. If anyone can give me any advice on this, what it could be, how to find out ec that'd be really helpful.

Well I'm getting one of the really short clones with the lump on the front for the battery, does anyone know if the kill flash will fit that one?

I'm currently the winning bidder on an Eotech replica for less than £10, and even if I don't win I'm buying one, and was wondering, do I need a flash kill or will I be alright with a cheap slot in clear lens protector? I just don't want my holo sight to shatter on my first skirmish, or ever really.

IT WORKED! With a little bit of filing and some other materials the metal outer barrel front from an old broken L85A1 springer fitted. I think this looks much better than the standard iron sights and now leaves me plenty of scope for optics etc. If you look carefully you can see the small mound of modeling/plumbers milliput I had to use to help secure the barrel.

Found my dads old broken L85A1 springer and figured I'd take a look, does anyone think this MIGHT fit on the G&G CM16 Raider L where the front end of the outer barrel goes? I'm not overly worried if its not a perfect fit, it would just mean that for now I have no front sight in my way and wont need to buy another out barrel yet. My gun isn't with me atm or I wouldn't have asked you guys first!

No problem, all I need to do if find a front end online that'll fit a CM16 Raider. Easier said than done!

The front sight on mine seems pretty solid. The two pins I think you're talking about have even been welded perfectly, or were never pins in the first place.

Also, completely forgot to mention that it IS rear wired.

This is what I have. It confuses me somewhat as the only cm16 to come with the RIS rails don't have a full top sight. The bit I'm looking to replace is from the end of the ris rails to the end of the flash hider. I've had it off before and was hoping I could find one somewhere that doesn't have the front sight.

So I got a CM16 a few months back and have been wanting to make a few changes. I have things in mind and need to know if the front end of the outer barrel, the bit with that horrible front sight, is interchangeable with the front end of other M4's. I've already figured out how it comes apart while practicing maintenance and trying to stop bits jiggling around, but I haven't got a clue if the front ends of the other combat machines, most notably the ones WITHOUT the front sight, are attached in the same way. If anyone could tell me which ones are, if any, that'd be great as payday is coming up and I really want to start making my gun look more the way I want it to.

Also the mags only stay in if I give them a slap, so I'm guessing I need to find some better ones, probably proper g&g hi caps

There was velcro in the mag well when I got it

So I bought a second hand cm16 the other day, and she doesn't seem to feed right. The first few rounds won't fire, and when I take the mag out about 5 bbs will fall out the mag well. Is this a common problem? I'm thinking it might berthed mag as the other pmag I got didn't have this problem, only the last two or three wouldn't feed.

So I have bought a CM16 with two "P mags", whatever they are. I have no idea what makes these different from normal mags other than the raised bits. I also have no idea what capacity these are or who makes them. They have the Magpul logo, but I suppose could just be licensed as Magpul do make RS weapon parts. I can't see any hatch to pour in BB's, and also have no idea what the little button on the bottom does, as the bottom doesn't seem to move at all when it's pressed in. Any help at all would be great here as I don't know WHAT I have.

g&g CM16 is about £120 on zeroone. AND they have a free two tone service. Great intro gun, and is apparently up to mid level (Only just got mine, love it though). *EDIT* Beat me to the punch.

Only reason I want another one is for a different look. The one I have is fine, just needs stripping once I have my Ukara.

Cheers, and yes, I was asking as it's bright blue.

http://shop.ehobbyasia.com/gandg-cm16-raider-m4-ris-battle-ready-combo-package-black.html#.VOKoSvmsXgw Pretty much that but with a full carry handle instead of a simple rear sight.

I've been looking at some crane stocks that don't come with tubes, and was just wondering if my rear wired CM would work with them with the tube it has already.

Basically I'm asking a really simple stupid question, if I was to replace the stock of my G&G CM16 would I need to also get a new tube, or just a crane stock that can hold a battery?

Managed to get a cm16 with two mags two tone for £90 Glad you guys stopped me from agreeing for the well straight away

Well that sig could be mine...a friend might lend me the 70-80 quid I need to be able to afford it and fuel. ICS sig 552 for £105 posted, in legal 2tone.