Whats

Currently live on JD Airsoft's website. They're doing any of ASG's H-15 rifles as a "Bundle".

Second video today confirms price at £69.99.

Hi folks, looking to move on my G3 SBS. I had this complete but recently took the gearbox out for another project. this left the externals sat around doing nothing. Consists of; G&G magnesium upper (modified with removal of material internally to accommodate front wiring) G&G navy lower JG retracting stock JG/cyma (can’t recall) mp5 SD front end. TM g3 hop unit. i have the g3 gas tube & charging handle as well as the mock bolt as well, they’re just not in the images. Also have fire selector and blanking tab, although id recommend a new one. This is ready to either drop a front wired gear box in OR would make a great HPA project. I’ve got a steel g3 trigger as well that I’ll include. just trying to gauge an idea of what sort of value I could put on this. thanks in advance

Hello Alex, You should be able to find Devil .28's in stock at Bullseye, Combat South, Airsoft Zone & Ammo Drop at least. For your tracers, we do Open Blaster tracers in .28, .3 and .32 Cursed and Devil still run side by side and haven't replaced one another per say, the key difference being all Blaster go through our additional steps of QC in Denmark before they're bottled up, Cursed QC is all done at factory. Hope that helps chap.

Chances are high as ASG have Gas and C02 magazines for ALL licenced pistols.

It’s a tabbed gear inside the “chamber” on the left hand side, moves up and down to apply or remove hop. No tools or disassembly what so ever.

So early January 2024 we’ll finally see the ASG CZ p-10c Co2 version in stores across the UK. i’ve got my grubby little hands on one so anything you want to know. Ask away. key points so far: -2 versions, “vanilla” & “tactical” -Alloy slide -Polymer lower - hop up adjustable without removing the slide whilst the slide is racked -Safety trigger with a mechanical safety under the front of the lower - “tactical” comes Optic ready but includes rear irons in the box aswell. 14mm ccw thread - ambi mag release, optic plate & threaded outer all available separately - 3+ magazines from a single co2 bulb at approx 10c

do it

Hi folks - built myself my G3 SBS over the summer & just want to share a how to video incase anyone else fancies a go.

G3 SBS build im 90% there with. Just need a collapsing stock (if anyones parting with one or has one knocking about ) Talk about labour of love! Lots of blood sweat tears and swearing. Just need to refit the mock bolt. Ground up rebuild inside and out. Only thing that’s left of the original TM MC-51 is the fire selector and stock. Internally complete ULTIMATE 8mm gear box, 16:1 cnc gears, 35000 boost motor, GATE Titan 2, ultimate compression set, guarder rubber & nub on a madbull python. G&G navy lower & Magnesium upper. Very bodged JG front end that only needed 15 minutes of dremelling ?

Hi mate, yes they are indeed in J. my biggest take was that ultrair & green only just sit over the limit at what is realistically the warmest temp we’re going to be playing in in the UK. The charts on the side of the cans make it easy to work out which of the orange/red is most suitable when it’s colder. && I’d love to say thanks, but sadly it’s not my workshop ?

Did a test last week of ASG’s full gas range through my stock MWS for science so you don’t have to. Devil Blaster .25 with hop set for .25 23c on all 4 magazines measured with a digital thermometer.

Hi folks, looking for a rough estimate on my MWS m4a1. Internally completely stock in the bolt. Hop-up upgraded with ML 60 & omega nub. comes with 7 gas tight magazines, one of which needs new feed lips. also have the complete G&P full stock kit and G&P M5 front end. Barrel has the required spacer to fit MWS upper & the kit goes on without fuss in about 15 minutes. skirmished indoors twice & runs like a dream. Selling as moving into Air Rifles. Any help on an appraisal would be greatly appreciated. thanks in advance.

Looks like they’ve really thought it through - 88g is definitely available in the UK so that shouldn’t be an issue.

I read the “lightweight recoil” the opposite way around to you. Not that it will be like the “featherweight” 249’s in terms of build, but the recoil it’s self will be light weight, probably for efficiency so it can get through a full magazine