JinxDuh

I don’t remember really, sorry. It is with the titan though! Here was my post about the fps issues. Note the fps I quoted here is with the hop adjusted to my liking and with the parts being “worn in”

The optic had scuffed the paint slightly, but yeah I was also a little shocked that a big company like patrol base would pull something sleezy. Although if they did refund, I’d of ended up getting another one anyway so 😂

They wouldn't refund or replace, because I'd stuck optics etc onto mine so if you can - chrono it before kitting it out!

It's been a while since it was done, so I can't fully remember but when I bought it the replica had an fps variation of about 150, it was all over the place and had a massive air leak problem. I'm sure it was a one off lemon case, but I sent it back and they replaced the nozzle, hop up rubber and something else and now it shoots bang on 342 with 0.5 variation up or down (On .2g) - They replaced oem parts with oem parts, by the way.

I'm assuming you mean the Umarex one? I absolutely adore mine, after Patrol Base fixed the lemon I received from them. So far all I've done to it is fitted a gate titan (Mostly for the 30 round mag lock, no firing without mag inserted and bolt press to "load" it) and it's been an absolute workhorse. It hasn't needed anything doing to it. I have 0 regrets about buying one, personally.

M90 is nice, but 4th for me is AUSCAM 😂 Although, really... Anything that isn't multicam 😂

https://www.ebay.co.uk/itm/184417993754

If there's no screws left over at the end 👍 If there's screws left over but it goes pew 👍

Do you have a link for them please? I searched on google and facebook but couldn't find them.

3 out of 4 of my favourite camos all in one pic 😂

It's not even straight...

Awesome, thank you! I know 0 about suppressor makes so I had no clue 😂

Big Resident Evil fan and recently got myself a Krink (Thanks HuttArmouries) and figured I'd make a dragoon build. I've sourced and got every other part ordered, except from these... The torch mount And the suppressor Any help is massively appreciated! Update: I've found the torch mount, just need to ID the suppressor now.

The two toned wa2k 😭

Can confirm KA SAA sucks, massively.

He had it in the appraisals before it was posted here too 😂

Update: I followed the video, thanks Gavin. I put some coins in, wasn’t enough. So I stuck an AEG gearbox Cylinder behind the resin block and now it’s returning too fast BUT it fires!!!!

So, it wasn’t the issue. Even with the buffer tube completely off, when I manually pull the bolt back it gets stuck in the same position… I’m lost for ideas ☹️ If I move the upper receiver slightly the bolt can be moved back, it’s like it’s getting stuck on the actual receiver. So far I have: Taken the hop up out, it got stuck. Removed the trigger box, it moved freely Made sure the box is seated correctly like in videos, still got stuck

Because usually DCA comes up before a lot of other sites, and as he’s called it multiple times before he adds “cunt tax” for people that don’t shop around. Plus greed. Mostly greed.

So it turns out after speaking to my pal I got it from, the muppet swapped out the WE buffer for an S&T one which is a different shape and made out of plastic. I didn’t think about it, and just assumed it was an older WE as he did say he had it for ages. Didn’t want to send to China again for the 7th time for a few parts, so ended up getting one of the Guarder ones https://www.fire-support.co.uk/product/guarder-recoil-buffer-for-kscvfcwe-m4-gbb-fixed-buttstock-2018-new-version Hopefully that should solve the problem and then I’ll finally have a working, slightly upgraded M16A1!

I dropped this kit into my xm177 (Converting to an m16a1) and the new BCG will fire once and then the whole bolt gets stuck back. I have to remove the entire buffer tube to then remove the buffer spring etc to then take the bolt out. My initial assumption was: The retainer pin was too far up, so I tightened it all the way and it still had the issue. I'm wondering if there's a difference between the m16a1 buffer tube and the xm177 buffer tube and there isn't enough "springiness" to send the bolt back... I've never encountered this issue before, so I have absolutely no idea what to check for or what could be the cause