Rollade

WE AK74, test fired only, boxed with one spare mag and a spare red mag cover.
Been on display in a glass cabinet in my office.
Mags as new and absolutely gas tight, gun literally as new and in perfect condition.
Complete with box (not shown).
These are very hard to find and are out of stock everywhere.
Will post at cost if required.

Selling my cherished Mafio 1928 GBB thompson to pursue other replicas of Germanic origin.
 
This is a Full Blued Steel Mafio 1928 that is based upon the WE M1A1 System. It comes with all the correct trademarks.
The package sell package comes with spares to keep you going for the next Decade!
 
-7 x 20 round style mags (2 of which have minor leaks)
-Plethora of spare nozzles
-3 extra bolt carriers (1 of which is steel, however I do not recommend using this one due to decrease in cyclic rate)
-Plethora of spare parts too many to list
-Extra Mafio airsoft buckle and screws in the event you want to attach one to the handguard for the "british look"
 
Due to Value- Collection only as I would like buyers to see.

I am open to sensible offers
 
I am interested in PX for the following replicas:
-G&G MG42
-FG42
-TM AKM GBB
 
Shooting Video: https://youtu.be/iyKBmBad4Bw
 
 

Back up for sale as the previous buyer backed out.
VFC416 Gen 2 GBBR
Currently firing Sub 1j on .25s
The bolt carrier group is brand new and has an npas inside for you to tune your FPS
Comes with 2 mags, tho one was previously leaking at the valve, but I have since doused it with silicon oil and tightened it and it has been gas tight ever since.
Stock butt plate bottom tab has broken which is why it is taped up.
Gun shoots and fires as it should, usual scratches from attachments and use etc.
 
Bought it 2nd hand, but never got to use it as I prefer using my MWS.
If you require more pictures and videos, please DM me.
Looking for £350 + shipping
 

Hi everyone going to build a mk12 holland from the ground up ... tbh all I have atm is a bare a1 lower and some random bits lol . 
Parts I'm looking for are : 
we m4 flat top gbbr upper receiver 
we m4 buffer tube.
we m4 gbbr hop unit 
Madbull 16" recon barrel set (aeg)
madbull 12.5 pri gen iii round handguard (bk or tan)
larue lt104 mount 
 
Tbh if anyone has a wreck of a we m4 i would even look at that
 
Thanks john
 

Hi,
 
Selling my coveted grail pistol as I need to free up some funds
 
It is a TM MEU based 1911 fully upgraded with a rare, custom-order guarder kit along with fully steel/stainless external parts and upgraded internals. It took a lot of headache (and money) to get it spec'd out exactly like a RS Springfield Professional 1911, sans the magwell which no company was producing a steel option. Hopefully if you're into 1911's you would appreciate this is the original 1911 model that passed the FBI HRT trials, and also was the base for the well known MEU pistol's late variants. Even if you don't care about that stuff, it's a beautifully kitted out pistol nonetheless, and as far as I know the only one in the airsoft world that sports the original Professional look.
 
Really sad to let this one go but hopefully it can find someone who can also appreciate the true value of it ( or anyways is more financially comfortable than I am at the moment ). The gun comes with the pistol itself and 2 magazines.
 
If you have any questions, please feel free to shoot me a PM and I'll get back to you asap.
 
Price is £450 - includes PayPal fees and postage
 
As always, I've listed the full list of upgrades below - split into upper and lower assembly for convenience.
 
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines  
 

We mp7, new gen
3 gas tight gen 2 magazines
Recently serviced and maple leaf super rubber installed.
14mm thread adapter and random flash hider 
340fps
£250

Hi,
I would like to sell my VR-16 GBB. Overall condition is good.
The custom is based on a M4 RIS, all original parts are included.

Length : 785mm / 866mm
Weight : 2.780gr
Material : Metal
Thread type : 14mm CCW
Hop-up : Adjustable
Firing mode : Semi + Full Automatic
Blowback : yes
Power source : Gas
Outer Barrel lenght : 14.5 inch
Inner barrel (mm) : 363
Inner Barrel dia (mm) : 6.03
Magazine capacity : 35
Power (FPS @ 0.20gr) : Fully adjustable, NPAS inside
 
External modifications with estimated value :
Angry Gun Geissele Mk.16 URG-I Handguard : £150
Vector Optics 1-5x24IR Forester scope : £120
GK Tactical Picatinny rails for M-LOK = £15
BCM style front grip = £5
 
Note :
A small piece of the nozzle is broken, nothing bad.
 
The rifle is located in France, shipping is included.
A valid UKARA number is needed.                                                                                                                                                                                                                                            

WE M14 GBBR 
looking to rehome my WE M14, has the following RA-Tech steel parts fitted:
Complete trigger pack
Cocking lever
Gas block
Bolt guide/recoil rod
Bolt catch/release
Has been locked to semi, comes with 8 mags, scope mount (needs rail fitting but holes already drilled) & enough spare parts for several M14’s NPAS fitted and currently doing around 300/320 FPS on .20’s 
Looking for around £600 or offers - would trade for: 
MWS 
VFC Gen2 416
VFC MP5 
VFC FAL 

Almost brand new G&G M14EBR 22" version in the very rare Silver color
 
You can find either silver 18" or black 22" somewhere now but not this combination
 
The condition is excellent. Have been only keeping it as collection so it has never been taken into a single game.
 
Has an integrated ETU and shoots at about 380FPS on .2 bbs. Uses mini Tamiya type battery. Comes with a 470rds high cap.
 
The bolt catch IS FUNTIONAL and the release is very strong and satisfying, not what is normally expected on an AEG
 
This originally costs about £600 to get it imported and asking for only £380 posted in original box

This was a project sniper build ,but It’s not my preferred style of play so I can’t justify spending funds on upgrades for it. 
last I checked it was firing around 490 on a 0.2g bb with nuprol 2.0 green gas. Comes with action army custom outer barrel which had to be modified to fit, original outer barrel,  action army 28rnd magazine and it’s original magazine. I’ve seen some nice builds people have done with these but it’s just not for me anymore. 
collection or parcel force 48. 
open to offers

For sale, GE M16A3/A4 GBBR.
I did have plans for this pew but i can’t justify buying more mags for it when I mainly use my WE M4 (mags aren’t compatible). I bought it a couple of years ago but never used it,  It’s basically brand new. It’s probably had 1 maybe two mags through it. Unfortunately no original box, didn’t have the space to store it. it’s overall condition is near new, maybe a couple of tiny marks but nothing really noticeable. 
seems to have a decent range and accuracy although I only tested it with 0.2 BBs.