Diablo675!

Every other week comes up with “something went wrong” can’t view any page. even uploading a picture it states sorry unknown server errors.

Yeah the only issues on the PTW ones is because it pulls the cylinder but has to stop without applying pressure to the hop unit.

It’s a sticky wicket mate I’ve tried MWS charging handles in my systema mk18 they work but some require modifications due to the hop unit you’re using and type of cylinder

Yeah they are a great to keep spare. I have 3 spare one with a diy Npas and G&P nozzle setup I main my BCM Jaeger Npas and dynamic spring set

If your fitting the Jaeger Npas into the DE nozzle you modify the NPAS not the bolt carrier or the nozzle. Or just replace the DE nozzle with a Tm one or G&P spec then the Npas will fit right in. I fitted the Jaeger into my partners mk18 and worked flawless fitted the Npas to my L119a2 and constant 1.1j on .32s using propane

Not a chance 2k base price. if you are on about because it’s a £2400 build then my systema PTWs should be near £3000-£4000 my mates one sold for £1200 with RS EoTech, 6 stanags steel bolt, modded motor there is one for £900 with 6 mags and uprated parts. URGI models are selling for £1100

At least you found it. I made the stupid trigger spring fly on my first strip down….. 6 weeks later I received one from a HK site ? all for £4.99

Worth about £1300-1500 max or supermax GB? 490 motor or Solink?

These packages are going for about £1800 depending on spares since you have a spare up and ALOT of mags safe to say £1800-£2000

If it’s soft and squishy have a look on YouTube for a video that explains how to modify the hammer and check the sears. they are over moulded from factory so after time they give the feeling of the dead trigger yeah the chassis only needs very light greasing and the piston needs oiling every 20 mags or so for it to be decent.

What type of feeling do you get from the trigger? soft, squishy or does it just feel like a dead trigger? has the chassis been removed fully cleaned and lived lately? tm Mp7’s are known for intermittent working if they are over lubed. the seat sometimes fails and the steel sear is a good replacement if can find one.

All dependant on the parts list. on my old WOC Build I shimmed the stock Routers to the old 5ku nozzle. some people modify a GHK nozzle and seal to fit the Wa Bolt etc which in turn lead to more issues down the line.

It all depends on the current setup if the pistol is great with gas efficiency like Tm and some WE models.. adding an updated router will need some supporting mods like re-enforced nozzle and return springs piston seal/cup. if the gas system struggles from factory with efficiency due to a poorly designed nozzle and Mag seal, then it will act like you run it on propane. my advice is to actually shim your current mas seals and test how it improves it.

It’s just mag cool down mate. easiest thing is to get pocket hand warmers and put them in each mag pouch, keeps the mags over 18° easy and allows the gas to perform like it’s summer

Can I get someone’s input.. I have a BCM bolt with a GM 3.5 nozzle and Npas, Waldo nozzle spring, dynamic Npas spring and it feels like it’s getting hung up more comparing it to my second Tm bolt running the same set up just a G&P nozzle. The BCM bolt releases the nozzle way later in the cycle motion. would running the G&P nozzle be better long term using propane?

Twin builds systema ptw cqb model Gbb Mws bit and bobs build

Gbb mws 2 systema PTWs too many trick and RS parts to list

cheers chap. yeah used the search and was only 1 mag with them. Will be selling it. life changes, needs must

Selling the second project masada recoil spring may need fixing on top lug as small arms have broken 3x GHK mags work fine 1 wa pts mag weak ok gas release but works fine 1 co2 mag, lost the bulb seal and base plate the rifle works and chronos but I don’t have time to custom fit the hop units to convert to AEG comes with numerous parts and fitted with Npas and upgraded nozzle

Nah I avoid that discord due to a team mate being bullied by the pathetic mod children. Cheers for the reply though chap will see if anyone on Reddit has one running if not will wall mount it ?

So I’m actually trying to stabilise the fps of my Gbb Magpul Masada no it isn’t a we msk or a KWA pts version Mine is WA/GHK bases My question is anyone on here actually have a fully working one? Have a few upgrade questions

After receiving my 2nd TM Mp7 last week as a faulty but working item. I found out the issue was a stiff and not resetting trigger, so opening it up I found that there was no Trigger Bar Spring TM-MGG-81 Anywhere in the Uk with this in stock or even anyone on here HPA swapped theirs and still have the Gbb internal?

Been looking through the thread and no luck. received my 2nd TM mp7 last week, was faulty and new was trigger issue. opened it up and found out there was NO trigger bar spring, TM-MGG-81. Anyone know if there are compatible springs to fit or will I need to modify a AEG trigger spring? or has anyone HPA’d their and still have the spring going spare??