-
Posts
63 -
Joined
-
Last visited
-
Feedback
100%
Profile Information
-
Guns
TM M4A1 MWS,
TM Mk18 MWS,
TM MP7 GBB,
TM FNX-45 Tactical,
AAC T10 Sniper Rifle, -
Loadouts
Non Gillied Sniper,
M4 -
Sites
Anywhere within 1-2 hrs drive
-
Gender
Male
-
Location
Essex
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Panama's Achievements
-
Panama reacted to a post in a topic: Tell Us a Gag. Please!
-
Panama reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
Hi all, I recently got a second MWS; a TM Mk18 MWS which, knowing the issues with the barrel nut, the shops tech loosened it for me before sending it out. I also purchased the nut tool from Black Rifle. Do you know if it's possible to swap the barrel nut/spacer that it comes with as standard, for these two, so that the handrail comes apart as it was originally intended to? PTS Spacer: https://emperionstore.com/adapter-ring-for-tokyo-marui-gbb-pts.html AEG Barrel nut: https://emperionstore.com/marui-mws-mk4-barrel-nut-zparts.html
-
RostokMcSpoons reacted to a post in a topic: Any recommendations for an Eotech clone sight 551/553/558
-
Any recommendations for an Eotech clone sight 551/553/558
Panama replied to RostokMcSpoons's topic in Guns, Gear & Loadouts
Yeah, in the bottom pic it looks a lot better. -
Any recommendations for an Eotech clone sight 551/553/558
Panama replied to RostokMcSpoons's topic in Guns, Gear & Loadouts
It does look like is not quite mounted right. This is the exactly the same sight on my mk18. Ignore the duvet ;-) -
Panama reacted to a post in a topic: Any recommendations for an Eotech clone sight 551/553/558
-
RostokMcSpoons reacted to a post in a topic: Any recommendations for an Eotech clone sight 551/553/558
-
Panama reacted to a post in a topic: Any recommendations for an Eotech clone sight 551/553/558
-
Any recommendations for an Eotech clone sight 551/553/558
Panama replied to RostokMcSpoons's topic in Guns, Gear & Loadouts
I am in a similar situation to the OP in that this is the first time I wanted to get a classic Eotech style holographic site for an mk18 build. I have bought this site off fleabay (yeah I know...) but from a looks point of view it was the closest to the Eotech and that was in stock, without spending hundreds of pounds. At this stage I am not sure if I like this style over the red dots I have but, this was for the look: SOTAC EXPS 3.0 Holographic Red Green Dot Reflex Sight XPS3 558 £63 It looks Ok but, there is a lot of distortion on the lens if you move your head/view point from the very center and I am considering sending it back but, again, no where has stock of the HW S1 in tan in stock which seems the best clone even at ~£140 I just stumbled across this very good comparison video which also backs the claim that, out of the ones tested, the HW S1 is the best: -
I ordered from them two weeks ago and it/they arrived without any issues. I have used them before and never had any issues or with them responding when I have had a concern (only once). Defo one of my preferred suppliers of airsoft stuff
-
Pollynator_bravo2 reacted to a post in a topic: BBs in bulk
-
Panama reacted to a post in a topic: The 'What have you just bought' Thread
-
Airsoft World.net used to do them in large quantities but, appear to only list the black ones now which are out of stock: https://www.airsoftworld.net/asg-devil-blasters-0-20g-bbs-100-000-bulk-box-of-black-invisible-bbs.html
-
Panama reacted to a post in a topic: THE TM MWS thread
-
Panama reacted to a post in a topic: THE TM MWS thread
-
Paul72 reacted to a post in a topic: THE TM MWS thread
-
Panama reacted to a post in a topic: THE TM MWS thread
-
PewPewLoki reacted to a post in a topic: THE TM MWS thread
-
Sure, send me a couple and I will try them for you 😆
-
It is very tight. I ran 3 stick lipos and if you held two together and got the perfect @2 o'clock angle on the right tube and about 10 on the left tube with the other one you could just get them in. I tried the Titan ones in hope, but they were just fractionally too wide, only maybe by 1 mm but it was enough that even with trying to trim the internal fins, they didn't fit. I avoided jamming them down the main stock tube as I didn't want to touch the mosfet and fuse in there. I have switched to a GBB now, so don't have to think about it anymore 😉 good luck.
-
Panama reacted to a post in a topic: THE TM MWS thread
-
Paul72 reacted to a post in a topic: THE TM MWS thread
-
Ollie talks Airsoft encountered that very problem with the Guarder ones:
-
Panama reacted to a post in a topic: THE TM MWS thread
-
Paul72 reacted to a post in a topic: THE TM MWS thread
-
Adding the link for anyone who didn't see this on Discord:
-
-
I have one of these attached to a SafariLand QLS: https://smile.amazon.co.uk/Design-Speedy-Holster-Airsoft-Aisoft/dp/B0116NJQ6S/ref=sr_1_5?keywords=smg+holster&qid=1639057799&sr=8-5 I use the mp7 as a secondary for the sniper load-out and switch the holster between pistol (m4 load-out) and mp7, both on the QLS. This works really well although the above holster is a bit of faff to get the mp7 in to if you are in a hurry.
-
at that price you could afford a second one and dual wield them 🤣
-
Could it be the o-ring that goes on the outside, on the end, of the inner barrel to stabilize it inside the actual outer barrel?
-
The face mask and eye wear combo looks really clever/interesting, what is it?