Hypokondrikern

The Pmags need a slight modification like seen in the link in P4radox’s post. But you can also buy the original TM part and replace it with. That’s what I did. I have heard that you get less recoil from the pmags but that’s negligible for me as I anyway play with aluminum bcg and plastic absorbers. I’d rather save some weight and get a better look and feel to the mag. It all depends on what you look for but out of the box - OG is better. ( p.s don’t trust me too much as my mags are still in HK )

gosh, I totally missed that. Thought that all HK shops sent with surface considering the situation we're in. Well I’ll have them before Christmas. It’s gonna be a strange airsoft summer with one 20 round mag. Just sold all my old originals 30 rounders to afford the pmags. enjoy the pmags

Seriously?! : (( it could have arrived by now if it was sent pronto with surface transport... just sent them an email to see what’s going on. I have much trust in Rainbow8 but they were out of black pmags which forced me to go looking somewhere else. How did Rainbow send your parcel? Surface or air?

Here are some pieces that didn't make it to my current build but might be of use to someone else. Mws barrel ring, ambi selector and high speed buffer. pm me if you’d like them all

That sounds swell. I just ordered some MWS pmags from JK Army and got the impression of that I wouldn’t see them until the end of the summer.

hey, thanks for the calming reply. I read around on forums and such but was only left with the conclusion that it eats material both when stripping and anodizing. anyway, I feel comfy enough for the makeover and I’ll ask for the hard anodized finish. thanks again!

So, I have two golden Aluminium BCGs for my MWS that I was thinking of having reanodized in black. I hate the golden look but it comes at price. The anodizing process eats up a thousand of an inch material from the aluminum .. material that is lost forever. Would you advice against this considering how the air seal might be worsen? Or do you think the tolerances will remain just fine?

Lovely! And the bolt lock gets its time to click into place? Or do we need to unscrew the buffer tube 2 cm? 😉 I have had no problems with GunsModify and their nozzle. Their parts are fairly easy to come by and modest in price compared to others. Good luck!

Lovely! Will the bolt lock keep up with the faster action?

I bought a set made by Gunsmodify from Red wolf airsoft. This set has served me well. P.S Redwolf has quite a lot of other parts as well which might be of interest. Otherwise go check out Rainbow8.com Did anyone try the lightweight bolt stop plates from Angry gun and Gunsmodify?

I see, but I think he replaced the gas route lip with a standard TM as well. I recall seeing an image of it at least. Did you try this yourself? Could be that it is too tight or deformed.

So mag sits too high and gas route / rubber lip is too high as well? I remember that badabing changed nothing but the empty magazine tab which means that the protruding lip might be what causes the jam. Did you replace it with standard magazine lip?

It could be worthwhile to read up on Bada Bing Pictures's facebook page. He had more or less the same problems - a lack of recoil and power. https://www.facebook.com/BadaBingPictures/ I have seen very few complaints about the magazines and find myself confident in a purchase. The loss in recoil seems like an acceptable trade off for the pmag style and comfy weight but one should probably do a slight filing to the top of the bolt tab to prevent jamming. But I'd like to hear more opinions. What do you guys think of these? 40 round mags :0 P.S is it time to compile a google doc FAQ and summary of earlier pages on the MWS topic? Something for the beginners but also to formulate a consensus. We had one but it got lost somewhere on page 80. Can we make it pinned somewhere?

I’d invest in one open top pouch with some sort of kydex insert which allows for superior retention and draw speed. Esstac kywi (already mentioned is the choice in the real steel world) is a good choice! But you don’t need to buy these things - you can make them yourself. Buy some flyye m4 pouches ( I have had these for years ) and make a kydex insert. Sheets can be easily cut and bent with a heat gun. DIY guides are easily found through google.

Thanks ! :)))

Feel free to PM me if this happens! True, I wasn’t aware of it - one thought it would be a straight forward process as with KJW. You email and see the parts in your mail 2 weeks later.

I got in touch with some resellers of genuine TM-parts to order some bits specific to the MTR-16. Apparently, TM forbids the reselling of the MTR parts. IF something breaks and you wish for a replacement part specific to the MTR - one has to send it to Marui in Japan :(( Just wanted to let you know. I have been trying for a month to source the grip and the real steel equivalent was just taken by the customs.. let me know if someone wants to part with their MTR-grip...

Tinkering with my MWS and realized that the new roller + pin from Gunsmodify doesn’t fit any of my bolts ( standard + uac ) - how is to run a bolt without the wheel?

Anybody who did a similar mod to their trigger? I’d love to know how one gets this crisp reset

Thanks, that was what I meant: shot to shot consistency. Other gbbr platform fanatics talk a lot about how the nozzle valves and npas:s improves this consistency from the original but it seems to be different with the mws. I’ll stay with the original for now and see if it needs a npas to stay safe this summer.

Hey, for those that got the RA-tech npas - did you see an improvement in consistency as well? and the anti reversal latch for the trigger pins - is that purely bling? P.S Pmags in stock at JKarmy

so what’s the verdict? (!)

looks promising: https://www.youtube.com/watch?v=5WOJpPcGSwshttps://www.youtube.com/watch?v=DQhBgXPxoJY no modification needed - one of the gents in the videos had some issues clearing the mag as the bolt lock engaged half way...not properly seated? Problems of the first batch? Hard to tell Anyway, I’ll just wait around for a few more videos that cements it’s function thereafter - investment which should be a lightened burden as they are cheaper than the iron airsoft version. while here- How are we with the nozzles for this platform? That is one of the main upgrades for the popular KC02 from KJW but the standard TM seems to do its job in the MWS as I have seen very little text on the topic. Most people seem to opt for the NPAS with the obvious benefit of being able to adjust the FPS - but does it also improve the consistency?

https://shop.jkarmy.com/ace-one-arms-saa-m-style-35-rds-magazine-for-tm-mws-bk-de.html new hope regarding the Pmags! ( this time in BK and DE )

Someone with a MTR pistol grip they’d like to part with? PM me!