johnnyj

Nice clone that with the front and rear clamps. Just need to know about his tm now , old school or recoil

All aegs have different lengths of barrel sorry to say and this can impact fitting handguards and kac type rails. If this is an old spec aeg they have there own delta ring and the kac rail will not fit as it clamps on to the delta. The end caps again can be different sizes. Get some photos for me and I can have a look in my parts boxs ( got probably 6 or 7 different kac rails , and multiple caps barrels )

Couple of bits landed today , WAS grab bag from ebay chuffed with that but this mots popped up and was far to cheap to pass up ! Was dreading it having the i5 gearbox but nope looks a stock g&p box

When these first came out I modified a gen 2 classic army a2 body to fit the cylinder and others at time done this mod on vfc 416s. ( should have the body knocking about still )

I have the proshop version that has some steel internals ( same as yours ) but I expect the hammer and slide catch to break at some point but will replace with nova/guarder etc steel part.

As the lads have said rules, but got to say what's meant to be missing from the m1 ? Owned 1 my self some years ago and looks complete? ( and no I don't want another 🤣)

Bit faff this one. Probably 15-20 years ago I had a warrior assault systems od 901 with built in mag pouches ( similar to the weesatch)and after I got rid of it I had a TAS 901 exactly the same in Cb .. Fast forward to the last month or so been looking for another set. Turns out the 901 does not have built in mag pouches 🤔 ( fecking did I had 2 and remembered it listed in shops ) Anyway seen this so called tas "vest" on ebay .. so made sure to grab it. Hidden in the small print in a bunch of text was " no belt or straps).. 🤬 it's literally just the front panel lol and to rub salt in all the bungees are perished.

Got this mrp kit from firesupports sale in July and have only just finished building it for my daughters first rif. Full g&p box with a titan ( robbed from one of my guns) , and parts box accessories. If anyone has a g&p lmt traded lower they want to sell let me know 😆

It's easy to spot a we rifle, clear hop unit , stock tube is a 2 part jobby , paint is easy to mark , front pin will not come out etc .

I might have been having a drink Sunday night having a look on the forum 🤣 ( I know silly thing to do ) and found a WAS vest for what I considered cheap and it was 10min away. ( I will admit I didn't look to hard and thought it was a 901 🫣) I now have a great WAS elite ops centurion

Don't have a cyma but worked on plenty, never come across a we box in one . Why will your cyma box not fit ? You sure it's not a we aeg ? ( they take standard v2s also )

It's great that your doing this , so many people never try ! Another thing that is sometimes missed if a gear is twisted or the axle off plum , had this on some new gear sets in the past never mind old sets.

Only place you might have an issue would be the delta but even then they are cheap to get. I use sixmm sometimes but I got my own e&c a2 reciver from firesupport.

I'm jealous of you guys , mine are stuffed in cupboards and all over the house hidden away lol ?

I love my gas rifles but this is probably older than some of the members ? Reworked g&p mk12 mod1 . Was trying to build a tribute to the fdny mk18. And it's only just finished so I can sell it on ? Started off as a standard g&p mk12 - m16a1 lower Ka ambi selector Gas buster charge handle Arms bipod mount with acm bipod A1 fa Ergo grip Clone #22 mounts Madbull pri rail ( was never paying 1k for the correct mount lol )

A pal gave me his handguard to build an upper for him so decided to build a clone of the kyle lamb rifle to try for a trade for a gun he has I want lol.. yea not working so will be getting pulled apart. G&p a2 lower ,g&p upper , g&p outer and steel kac fh , g&p lipo tube / car15 stock. Is meant to have a g&p storm grip but didn't fit it. Systema gearbox with shs high torque motor , still needed bits doing to fully finish but don't think it looks to bad.

I'm the opposite I want the cover open with a real looking catch ? , I'm sure I have a cyma a1 full upper and it has a gas tube I will try and dig it out

A pal linked to the FS sale that was going on as he knows I'm fanatical about g&p.. and it just happened to be my daughters 16th , so looks like I have a farther daughter build ? for her first rif.

I have just found an old ksc clone g18 in the shed. I will double check what parts are with it but definitely has the recoil spring.

Helping a fellow player out today and spotted these very crusty clone #22s , during the conversation he said he was binning them for another set of mounts. I paid for his new mounts and now need to clean them up ? sucker for anything mk12 related.

Bit of a rare model , did a trade with a pal for a c7 for what I thought was a a1 , took a week before I got it out the box .. its a g&p slab sided partial fence. Still need a a1 for the full set of early rifles ?

It's finally ready for a test shoot. Managed to get a new old stock systema gearbox , stuck a aster in it and using a ares high torque slim motor and slim grip. Thinking its on the warm side atm..

It could be just the sound but that gearbox does not sound right at all ! Back the motor off a little and retry