Jump to content
Classifieds rule 5 - adverts must have the username and date in photos. Adverts failing rule 5 will be deleted

strykerles

Members
  • Posts

    752
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    100%

Everything posted by strykerles

  1. Had to do some filing to where the guard goes into the receiver but it went on fine after some fettling. I had to be a bit firm with the gas tube as its in quite tight but it will move given enough force
  2. thanks for the reply, do you know of any other stock other than the zenitco style that will fit and use the same button release? I've fitted an MOE handguard but can't see the same style of stock fitting to my gun as they are all for fixed stock aks and don't have the same interface thanks
  3. Magpul style handguard for my arcturus pp-19. Also a proper style flashider but it came without the endcap so back it goes!!
  4. Dear dpd, please note that I live in the West Midlands. NOT SCOTLAND!!!!!

    1. ButcherBill

      ButcherBill

      Dear DPD, please note this package is due delivery to Scotland... please PM me for full address (don't want any scammers getting my package).

  5. Hi, recently purchased a Arcturus PP-19 and I want to chage a few parts to zenitco style but the Arcturus parts can't be got anywhere in the UK but the LCT ones can. ie the front handguard parts and stocks My question is- has anyone fitted the LCT parts to an arcturus and if so did they need modding at all? TFL
  6. I'll pass. now it's working it's worth at least £105 and some haribo 😁
  7. While we're on the subject of aks. i recently picked up this £100 arcturus pp-19 from the classifieds which now bring my ruskie weapons count to 9 🤣
  8. from looking at it you could probably get a tech to whip up a cable for you or you could try messaging G&G directly https://www.guay2.com/maintenance-area
  9. My local site has them up for pre order and apparently you can use the multishot bases from a TRMR with them
  10. Time Left: 1 day and 16 hours

    • FOR SALE
    • USED

    Cyma electric tri shot full auto/semi shotgun Recently serviced, reshim and warhead base motor fitted Currently doing 270fps on .25s with hop applied Some slight marks and wear on the rear sling point Comes with original 90rd midcap, marui 600rd highcap and 2 11.1v lipo batteries that fit in the limited stock space Collection preferred as its heavy but can be posted at £20 if required. Any less will be refunded £235 including fees Postage extra If required

    235.00 GBP

    - GB

  11. I've run an 11.1 in my aks without mosfets or fuses and they have been fine. will increase wear on the gearbox and components but i generally gut all my guns after a few games and add a aster or titan lol
  12. these the ones? https://rodes.dk/produkt/rodes-pro/airsoftvaabenogtilbehoer/magasiner/aegmagasiner/100-skuds-metal-magasin-scar-h-tpr-sort/
  13. Cyma do a version with that style of handguard, the cm077 being as it's a tm clone it might fit but can't be sure
  14. Don't forget knees aswell
  15. maybe trim the rubber a little with a craft knife to make them easier on your head?
  16. Funnily enough they their friend has something i want too
  17. I had a pinion stuck on a motor and I held my soldering iron on the end to heat it up and managed to loosen it off probably not the best idea in hindsight but it worked and the motor was fine
  18. Anyone ordered an RIF from kyairsoft before? if so how did it go?

    1. Show previous comments  4 more
    2. GiantKiwi

      GiantKiwi

      I've done 7 large orders from Taiwan & HK in the past 6 months, if the value exceeds £135 just assume you'll get taxed, as i've been done with tax on every single order. There is no flying under the radar any more.

    3. Terrywristt

      Terrywristt

      The issue with KYAirsoft is that their website will outright lie to you if it's in stock or not.  

       

      If it is in stock, you're going to be fine, however if it isn't.  You're going to have issues with chasing them up for months.  

       

      I ordered a Desert eagle slide from them in November 2023, which then eventually shipped in February 2024.  There have been horror stories on the airsoft subreddit where someone had to wait almost a year  for a part they ordered.  If you are going to order from them, i would strongly advise that you email them in advance, asking if it's in stock or not.

       

      Also if you check their T&C's they state they won't do refunds/cancellations after 2 weeks of purchase.... so that's always fun.

    4. pyromancer6

      pyromancer6

      Seeing as I've been waiting on a WE Desert Eagle nozzle off them for around 4 months at this point with plenty of umming-and-arring I'd suggest just going to somewhere else if they've got what you're after in stock. I've had good experiences with WGC and 18airsoft personally, but milage may vary, obviously.

  19. https://www.usedairsoft.co.uk/rif-s/electric-powered/cyma-cm103-ak-alfa-new-platinum-edition-aeg_i82855 Currently a penny cheaper minus postage on PB, with warranty!
  20. I've used a aps stock catch in a dboys aks74u and it worked finbe but it's cheap pot metal and it broke again so I'd try and find a steel one if possible
  21. Extreme lowballers - item up at a reasonable price say £120 offers £75 Saying an item is basically new when it's clearly been thrown round a site from the pics People that get can't take a joke on macks ?
  22. I have an old JG AK and it works with high caps from cyma and nuprol but as for mids I don't know
  23. Think there's an extra zero there ?
  24. Another option is the Cyma SVD if you'd stay with the platform. the newer versions have a Quick change spring and uprated internals Locked to single shot and is easily capable of DMR power, OTB they do around 350fps but after changing the spring mine does 1.8j on a .43
×
×
  • Create New...