marine

I'm sorry, I meant to take 10 shots per magazine in the test

Supernub ....SiX Gbrass ?

yes, good note. When installing it I make sure that it is not forced and that the bbs push guide does not rub excessively. It is more in the T8 nozzle I had to sand the guide because it already rubbed with the TM OEM gas routes

Hi ! 1. 0.32g Specna Arms EDGE bio 2. Yes 3. 10 shots per mag I see that VORSK gas it´s very unstable but you can see that max and min are better with T8 gas route

Hi guys, I change gas Route in MWS with T8 nozzle . Gas VORSK V6 67% Humidity 16.3° degree

Worst nozzle . Broke in 3 games.

to stock : up hop to barrel : down hop

I check leak introducing mag under water ... I wait 5-10min and see that it´s ok

Hi , I was problem with o-ring union middle mag .. use PTFE to repair . If you have dudes to PMAG , I did a lot of test to better performance

replace other oem nozzle.

Clean inner guide mag and probably solve your feed problem.

@JUSTICE_RAINS totally agree with you

holy shit. much better ace 1 arms

Hey bro , your problem has easy solution . Change nub .... a lot of stock MWS come with deformed . Put modify brown VSR and new nub ( for example tube BIC pen ) and enjoy PD : best gram bb´s it´s 0.30 or 0.32

I have similar , brand it´s element and works fine.