HuttArmouries
-
Posts
979 -
Joined
-
Last visited
-
Days Won
10 -
Feedback
100%
HuttArmouries's Achievements
-
DanBow reacted to a post in a topic:
GBBRs and optics
-
tiggeroo62 reacted to an advert:
E&L Qbz 191 gbb / hpa
-
This advert is COMPLETED!
- For sale
- Used
Bought second hand a while ago but never actually skirmished by me or as far as I know the previous owner. This is the special edition version with the special coating on the bolt. The gun is in near perfect condition barring some very minor marks from garden plinking and handling. The only minor issue is that the release button on the bottom of the stock is missing the small cap that screws onto it. It still works fine. The stock has been filled with a 3d printed spacer since I was using this on a hpa line. The gun comes with 5 120rd mags. All fully functional. original manual, certificate, patch, giant coin thinigimajig. a spare set of recoil and nozzle springs. a spare o ring set. 3 sets of 3d printed shims for adjusting fps. a set of 3d printed bottom and side rails. The bottom rail is missing one of its lugs but still works fine A direct tap line (This is meant to tap directly off a tank into the gun at 800 psi. dont use it with any other hpa airsoft gun, you will blow it up) Price includes paypal fees and postage.£575
-
I tend to get aliexpress optics a lot in the sort of mid range and Ive not yet had one damaged by being run on a gbbr but that is obviously partly good luck in the qc lottery. The only optic ive had trouble with was an old cmore like this which lost zero a lot and the battery bounced out of place. All of the others I have used have far more solid mounting solutions. https://m.media-amazon.com/images/I/41yhdJbGKvL.jpg It also depends a lot on the gun. Id feel fairly happy mounting nearly anything on my tokyo marui gbbrs as they have fairly soft impulses overall but Id go for something a bit more solid on my vfc's
-
This advert is COMPLETED!
- For sale
- Used
Got this with a job lot of parts I wanted and modern ar rifles really aren't my jam. Price includes postage and paypal fees. Externals in very good condition with a few scratches all stock. Internally it has a g&p trigger unit and an angry gun lightweight bolt carrier with a guns modify v3.5 nozzle in it. Im told by the previous owner it has an angry gun hop unit, omega nub and maple leaf bucking in it. It does seem to be struggling to lift .30s at the moment and may need a new rubber. Trigger pack looks more or less as new with minor wear but the bolt and nozzle are more worn. Everything still functions perfectly Comes with two mags, one original double eagle one and one guns modify one.£325
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for any sort of ak railed dustcover that would be compatible with the tm akm gbbr.NO VALUE SPECIFIED
-
Galvatron reacted to a status update:
Ordered a set of 6 mws mags from japan and just been informed customs have seized the
-
Ordered a set of 6 mws mags from japan and just been informed customs have seized them as dangerous goods. Luckily got a full refund but what the hell?
-
BigAl reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Rollade reacted to an advert:
Marushin 8mm shell ejecting mauser k98
-
Time Left: 3 hours and 41 minutes
- For sale
- As new
Price includes postage and paypal fees. A marushin 8mm k98 bolt action rifle with a walnut stock. Comes with 5 shells and 1 clip. The piston inside has cracked on one side adn the shelf that the sear catches on bent causing issues. I have straightened it and flipped the piston around so it catches on the far side. It now cocks and fires as it should. Other than that it is in near perfect condition and looks great.£250
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Looking for either a golden eagle noveske n4 or a stock tm mws. Dont need any mags, just the gun and external condition dosent matter as long as it works.NO VALUE SPECIFIED
-
.thumb.jpg.0e0dd323c084297b07707260ac0abbb7.jpg)
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for the standard mws trigger box and nozzle or complete boltNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for either a vfc ak74 or a tm akm preferably with a steel body kit.NO VALUE SPECIFIED
-
This advert is COMPLETED!
- Wanted
- Used or as new
Picked up a gun that had a two toned stock and need a replacement. Im sure everyone who likes magpul has a bucket of these so anyone feel like chucking me one? XDNO VALUE SPECIFIED
-
The_Lord_Poncho reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- As new
looking for 4-5 sokyo marui stanag mags. Would also consider 20rd short mags. Just looking for unmodified oem tm stanags.NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for a replica block2 handguardNO VALUE SPECIFIED
-
ButcherBill reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Rogerborg reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
What have you just 3d printed (for airsoft)
HuttArmouries replied to sp00n's topic in Guns, Gear & Loadouts
Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see?
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Looking for a vfc gen 3 ar for a project. As long as the internals are there and working external damage doesn't matter, smashed receivers or furniture are no problem. Will also consider guns with damaged inner barrels or other easily replaced parts.NO VALUE SPECIFIED
-
Currently mine has the stock barrel still in it but from the end of the threads on the outer it adds maybe 50mm, 40mm of useable space if you wanted a longer inner. Of course now its done I can make it longer or shorter. I mainly did this to give me more room to hang onto it as a foregrip on the original handguard was cramped.
