MSSNAFU

Originally this was a solid resin casting of an X26 Tazer, as used by HM Police, obtained from Etsy. (Its not a very good quality casting or paint job btw!) I bought it from a guy who was emigrating. Eventually I got around to modifying and hollowing out parts of it, so that my virtually unused little 24 BB lancher could fit into it. On red gas it will nearly send the shower out to about 5 metres, if you angle it up enough with the wind behind you 🙃. If you are able to sneak up on one, the look on the face of a player who hasn't seen it before when you shout 'Tazer! Tazer! Tazer!' at them, just before giving them a low velocity bb shower is priceless! 😄 I'm not really mobile enough to get the drop on someone any more, and like most BB launchers the range is pretty poor, so its time to pass it on. Someone with a Police or Security services build should be able to have a lot of fun with this 😁It comes with the two holsters pictured Offers over £55.00 incluing p&p the lot. UK only and Paypal only. 20250913_132443.mp4

About 9.5 Kilograms of used EBR/M14 bits. WYSIWYG basically 🙂 All of the parts are used, so all will show wear and tear, some will be damaged or broken. Definitely incomplete. Only useful as donor bits for other projects I think. £20.00 +p&p the lot. UK only and Paypal only.

About 5 Kilograms of used MP5 parts. There is a mostly complete, repainted, ex two tone blue MP5 empty shell in the box, along with most of a MP5 gearbox, selectors and cams, pistol grip sections and forends along with a smattering of other bits and pieces . All of the parts are used, so all will show wear and tear, some will be damaged or faulty or incomplete and only useful as donor bits for other projects. £25.00 the lot. UK only and Paypal only.

About 8 Kilograms of used G36 parts. These are empty shells for the most part. The most complete is an S&T that I slotted together for the pictures - disassembled again for packing. The S&T forend, rail and folding stock are ex blue two tone repainted black. There are two S&T Gearbox shells and some internal parts and a standard V3 gearbox shell. The other bodies are a Classic army, an unmarked clone and a real antique airsoft wise, a Star!🙂. There are some other parts in the loose parts box (pic. 2) - Selector parts, a hop unit and rubber, screws etc. The S&T, quick spring change, gearboxes have some additional cutouts and parts related to EBB and anti reversal latch release (ease springs! 😁), though there is no use for either on this version, so some of the additional bits are not with it. All of the parts are used, so all will show wear and tear, some will be damaged or faulty or incomplete and only useful as donor bits for other projects. £50.00 the lot. UK only and Paypal only.

About 16 Kilograms of used M4 parts. Before anyone asks the upper & lower parts of both the Classic Army and the Tokyo Marui empty shells pictured are all plastic, and I just put the bits loosely together for the photo's. They are both disassembled for packing. All of the parts are used, so all will show wear and tear, some will be damaged or incomplete and only useful as donor bits for other projects, and some will be faulty - I haven't tested any of the electrical components for example. Due to the weight and awkwardness the lot will be posted as two seperate parcels of ~8Kg each £100.00 the lot. UK only and Paypal only.

Tanaka M700 Takedown. Chrono @ ~450fps with green gas and 0.20g BB's using the mag marked '1'. 3 mags in total, one obviously leaking and modified. The other two held gas more than long enough for testing but I suspect a change of seals would be good as they've sat around unused for several years. The cocking piece and main body of the Tanaka's bolt are steel. Upgrades? Bolt handle section is alloy. There is a modification to the top rail - the last screw has been replaced with a 5mm grub bearing. This pushes the bolt down slightly, making sure it engages with the sear set up properly, overcoming some wear and tear. There is some issue with the safety catch as you have to unlock the bolt slightly to apply it when the bolt is cocked. The Tanaka bolt is adjustable. Comes with a partial KJW M700 for spares/repair. Missing inner and outer barrels. Will 'fire' a mag, though obviously with no inner barrel etc. all you get is a pop and the bb falling out! :-). Verifiable VCRA defence required, eg UKARA registration or similar. Package is about 8Kg and length puts it in the large postal category, hence the cost 😞 £90.00. UK only and Paypal only.