Steveocee

Taken like a champ 💪

It did cross my mind, as did putting a couple of ribs out of electrical tape but the heat shrink is incredibly supple stuff. It's almost like heatshrink velvet because it's so thin.

OK so thin wall heatshrink v1 didn't work, it turns out that its not got glue internally like the thicker stuff has so after a few bolt pulls it started sliding up the spring guide. Installation v2 is going to involve the use of a pritt stick.

If it's been done professionally then I'd be tempted to offer up the standard 60% retail, even then that's being very generous. If it's an OP who says they've done it then 2 categories: Good paint job:- 60% of the price of the paint, time doing it is value added for the buyer. Bad paint job:- Negative value as the new owner will need to put it right

Is this the bit where I get offended because you won't treat me as special as I think I should be treated?

Eh? I'm being nice and posting as regularly as I can so that WHEN I try and rip people off you'll ignore it 👍 Some people have so much front. £320 new or £450 used and no warranty? Hmmmmm tough choice.

Just skip the first bit as nobody on here will buy your overpriced tat. We're not all dicks, we're looking out for other members who may not be price aware, you're just salty as you're on the sharp end.

Been watching a lot of Tarkov lately. Looks great, I just don't have the time to get into another game 😞 Been playing Arma3 Wasteland when I have had an hour spare.

Just cut a piece off, probably got enough to do 10 spring guides on 1 order of this stuff. Fit's perfectly, used a heat gun rather than a lighter. As it's thin it doesn't try to hold shape so pulled tight one side before the other but has evened out well. Silverback spring fits over it with little to no resistance at all although will give it a think layer of grease before installing. For £3.29 I'm happy. https://www.ebay.co.uk/itm/Thin-Wall-2-1-Heatshrink-Tubing-Black-Heat-Shrink-Ultra-Thin-Tubing-Per-1-Metre/273904251393?ssPageName=STRK%3AMEBIDX%3AIT&var=573754623689&_trksid=p2057872.m2749.l2649

Just got home to find a parcel from Magya Posta; Faceless 509mm barrel Faceless R-Hop patch Faceless 100% seal Got to say the finish on the inside of the barrel is immense! Looks out of this world and that's before I've run it through with 99% alcohol. >Also got some heat shrink to test on the spring guide. The original one I bought was too thick to get the spring over but have found a "thin wall" version which should be better than electrical tape. Will link if it works. >Aaaaaaand my order of 19mmx2.5mm O-rings has arrived so I can fix my Mk23 mags hooray!

At best it's worth 60% of retail price if it's lightly used, working and if all the original parts are included. The fact that it's in bits, missing a part with no guarantee it will work means I'll be amazed if anyone sane offers half your asking price.

Courtesy of a marshall on site with a mobile phone. This is the "current" setup. Still need to get the headwear sorted out but pretty happy with everything else.

Didn't imply it was a scam. Just a bit overpriced. If you prefer to have genuine fakes then of course that's your opinion also.

Not particularly. My point was if the chap is selling fake sights for £17+fees+postage, why bother? Just buy fake ones for a £5r. If they are genuine then of course my initial point is null and void.

Why have a marking if it isn't real anyway? Looking at eBay some of the Magpul ones don't even have markings other than a "bit of a grippy bit".

Possibly real but second user https://www.ebay.co.uk/itm/Magpul-Industries-USA-Mbus-Backup-Sights-Front-and-Rear-Set-Black-Airsoft-Milsim/333477769470?hash=item4da4d2f0fe:g:dfUAAOSwb0BeG3Zb £17 https://www.ebay.co.uk/itm/Tactical-Folding-Front-Rear-Sight-MGPCQB-Low-Profile-Flip-Up-Backup-Sights-New/263630990101?hash=item3d61a1ab15:m:mb1MUKN_2485WeyH8KckvrQ £5 https://www.ebay.co.uk/itm/2Pcs-Tactical-Folding-Front-Rear-Set-Flip-Up-Backup-Sights-Black-Iron-Resin/323942642123?hash=item4b6c7c71cb:m:mjCrBFWGe0hTHkDO_BLc5OQ £7.14 https://www.ebay.co.uk/itm/2PCS-Tactical-Folding-AR-Front-Rear-Flip-Up-Backup-Sights-Well-liked-Effective/223579254192?hash=item340e5cadb0:m:mYfucSuF5hMTi5gQ2EpauTg £4.70 https://www.ebay.co.uk/itm/Flip-up-Front-Rear-Iron-Sight-Set-BUIS-Sights-20mm-Mount-for-Gun-Rifle-Airsoft/401990511523?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D0c9732611e59440d894b2f71e450cc22%26pid%3D100005%26rk%3D1%26rkt%3D12%26mehot%3Dco%26sd%3D223579254192%26itm%3D401990511523%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851

Or less than £5 new from eBay which have about as much chance as being genuine Magpul.

Thank you for letting us know. Hope you've enjoyed your break.

@proffrink Sorry to tag you. Any idea when the next patch delivery is going out?

@Cr0-Magnon have you received yours yet? I haven't yet but it's not quite a month yet for me.

SRS 60° Bucking Silverback airbrake Silverback operator knob Silverback M160 spring Longbow have stock if anyone else was struggling to find buckings and airbrakes like I was.

Baby had her first run out yesterday. Was difficult to get a zero as there was a very sporadic crosswind, even when turning 90 degrees it seemed to whip around the woods but I get it more or less there. Love how easy hop adjustment is on the FAST. Mag changes weren't as bad as I feared. Shoulder ached at the end of the day where the butt plate sits. Set up to shoot 0.43's I chrono'd with 0.2's as per site rules and came in at 452FPS, that's using a sport stock barrel, full seal and M150 spring.

Wow! Took it apart again the other evening and wiped out all the grease out of the cylinder guide area and off the outside of the cylinder. Relubed the cylinder with some Muc-Off Dry Lube and my god what an improvement! So much smoother bolt pull.