Jump to content

Neilbarker

Members
  • Posts

    84
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Neilbarker

  1. Yeah I didn’t sand it 😂 someone has however attempted it, Figure the KWA was licensed so what’s the chances of the krytac(Kriss) parts fitting this one 😂 might be worth keeping
  2. Nothing mechanical, just has some dodgy paint work that I can’t remove, but I am working on it 😂 and someone well before me tried to sand it off. I got it from a friend who got it about 8-10 years ago from someone who used it as a prop in an amateur movie. anyway, mechanically it’s been looked after, cycles great, kept lubed and cleaned, comes with a Hephaestus recoil kit, minus one weight in the buffer, wasn’t fitted when it came to me, 1 50rd mag and 1 20something round mag
  3. Just gotten my gear out of long term storage, been away from it for about 3 years ish, what’s the points to check/replace before play. Haven’t gassed it up yet or anything just looking ahead. clean it out, relube, I imagine the bucking won’t have enjoyed itself? Will it need replacing or? cheers
  4. Looking for a friend who’s no longer in the country. He has (well I have it now) a KWA Vector in so far as I can tell good nick, internal wear is minimum, it’s not been used in over a year, closer to two, and saw rare use before then. it has one 50rd mag, one short, possibly 25/30rd mag, a laser(I think) in the torch/laser port, this doesn’t work as we could never find batteries for it AFAIK, and it has a Hephaestus recoil kit in it. original box but it has seen quite a bit of wear (read target practice). Gun fires and cycles as it should, all modes work. No manual and no hop key. Anyone able to give me a rough idea on pricing? cheers
  5. it seems back then they had some issues with staying in touch, nothing good or bad since then. But they say no news is good news?
  6. HoW muCh? At least they’re kind enough to offer free shipping I guess
  7. I’ve sometimes got to do that with myself 🙄😭
  8. It’s like a whole new gun without a new gun 🙄 Maple Leaf Crazy Jet 260mm 2 autobot 70s CTR type stock Nuprol Bocca series 2 9” rail FMA functional PEQ LFS discs to replace the NPAS and about to add a TacVector Maverick (T1 clone) hopefully the GBBR won’t shake this one to death
  9. Is the freeze up issue with the KWA a known thing? Or is it just because I’ve got th Hephaestus recoil kit in mines? It came with the kit already so I don’t have the original parts to swap back in but it freezes open occasionally and the recoil mechanism seems to jam now and then. The lube I cleaned out was like gum when I got it so idk if it’s done lasting damage. None that I can see but I have this jamming issue cheers
  10. It's the nozzle o ring, it just helps with the seal between the hopup and the nozzle, my we m4 is running without one and was still firing 380 on Sunday.. Shouldn't do too much harm
  11. Just wondering if those cyma ones are conparable to the g and g raider? Was gonna grab one for my brother but they sold the last one.. So this is option 2
  12. I'm jsut wondering if these would fit in a CM16? http://www.patrolbase.co.uk/stanag-magazines/mag-130-rounds-magazine-for-m16-series.htm#.Vum0ENBju4k Cheers
  13. Actually just came across your thread, cheers. Are yous till using the same charger from there? How well does it work?
  14. As the title, gonna get my brother a gun for his brthday so he doesnt need to rent, but Im stuck for what battery to get as I started with a gas gun. Cheers
  15. https://www.aria.co.uk Pretty good too.
  16. I've had both since September pretty decent use on both and as I said the red dot has been down some stairs
  17. I've got two nuprol optics a 551 replica and an m68 and they seem to be doing well. The m68 took a tumble down concrete steps the other day and is still going no bother on a WE M4
  18. I'm just wondering if anyone could offer some advice. I've read that the Stock triggers are made from something akin to a hard cheese a few times, but mines has fired around 6k bbs and only just started double firing. Is it worth to replace it with another Stock unit? Or go steel? My understanding is that steel will increase wear on other parts, causing them to wear out faster and need replaced Thank you
  19. Hey, just wondering which charging handles will fit as mine is starting to show little stress cracks. I know the RS one does with a mod but availability over here is a problem. Are there others, modded or not, that fit? Cheers
  20. I could probably go a little over £100 without being lynched, anymore will need a lot of sweet talking aha.. Any pointers are defintely welcome!
  21. Sorry if this is hijacking, but, even though its not strictly necessary, does anyone know of any decent and not stupidly expensive parallax free/corrected sights out there? I've tried a WE EoTech clone and its all over the place, and I doubt the cheaper ones would live long on my GBBR Cheers
  22. Its a WE m4, I've seen CO2 mags for it on a few sites around so I'll probably grab a can of either guarder or nuprol 4.0 and see how those go before I get a few mags, Cheers
  23. By regulated do you mean an NPAS and the mags are just plug and play? Or is there something else? The hand warmers could work too, cheers!
  24. Yup, local site is outdoors, although if it wont blow my gun up indoors that's always a bonus, if such a thing exists, though not HPA (Dont wanna lug a tank around all day)
×
×
  • Create New...