Alicks

Real? or clone? Looks good either way

I have considered running training plates as a sort of fitness thing, just never got round to getting them yet.

Mate, this is what i have done. Thrown out my jefftron v2 processors and getting a titan just make sure you get the correct one, basic or advanced as they are both different, and you can only upgrade the basic to the advanced functions by buying the software update.

Oh dear, motors will do that if the wiring is not compacted enough. Or if you decide to use thick insulation 14awg wire....

Your going through my hell first you buy the belt, then you realize you no longer like the pouches you had!! so you convince yourself to get esstacs, on a side note the triple mag with gap fits the belt perfectly with malice, even tho it says it isnt compatible with molle

As promised Propper beauty and light weight due to the ally slide also very snappy when firing with either greengass or Co2

I will get some later for you after work It is a beut with all the trades and CNC ally slide

Just picked up, and used last saturday the new Umarex/VFC/Stark Glock 17 Delux Co2, the thing is an absolute beauty and a real beast to shoot. The mags are also really gas efficient getting nearly 4 mag reloads out of a single co2 bulb I would highly recommend them

KWC P08 (luger) with 2 extra mags......Soooo Sexy

Yep hoping wont b long :/

Hoping to get out and about soon. But on crutches after tearing my meniscus in the left knee. I have too much time on hands atm. So its onto cyma m4 now. Cheers Alex

Fired scar up this morning and shoots like a dream. Looks like i was flapping for nothing. How do you know if its shimmed and greased correctly? Is there a optimum sound i should be hearing? It has a pleasant wurring sound atm. But i dont know if this is the correct one. Cheers Alex

Good advice. Cheers

Thats very reasuring, cheers on my other gun (the cheep CYMA keymod that you have) the sector gear only have a small pin so i have never seen a tappet plate getting stuck back before... was freaking me out as its the first time i have done my own tech stuff. I took my cyma to a tech and he messed it up so badly that i have taken to doing it all my self, its still in pieces as i broke the moto connector on the wiring and keep forgetting to pick one up. Will putt it fully back together tonight and put some rounds through it. Didint want to put it back together only to take it appart... scars are awful on the selector switches!! Many thanks Alex

Hi all I have just stripped, cleaned, re shimmed and re-assembled the V2 gearbox for my WE scar. However when i have put it back together and test fired it the tappet plate stays retracted and comes forward when fired only to retract again. When i put it together the plate is fully extended and can be pushed back and forward on its spring and runs along the tracks correctly ( i checked with a torch). The only thing i can think of is the sector gear has quite a large molded chip on it not just the usual round peg, more like a crescent. Could this be causing the tappet to be pulled back most of the time as it is so large? Or have i missed something important when putting it back together? Also the piston doesn't reset to its original position at the front but stops at different stages of its run ( if you get what i mean). Is this caused my over-spin on the gears? Many thanks Alex Edit: the sector gear's crescent looks like this one: https://www.airsoftworld.net/shs-tokyo-marui-next-generation-recoil-hardened-steel-gear-set.html

Hi thanks for the replies. I am getting my local tech to look at it, he is also going to install the sector chip to see if it fixes the problem. I had a thieory that the combination of the motor and batery causing the tappet plate retturning to quick for the bbs to feed, but im not realy techy on aegs so it couldbe anything. Cheers Alicks

Hi all I recently bought a CYMA 515 M4 (link below). I had the spring downgraded to a guarder m110 when i bought the gun and it has been cycling well and really puts out the shots on full auto. The cycle rate on semi auto has always been garbage however so i decided to replace the rubbish motor with a new SHS high speed motor. The gun is now terrifying on full auto for a cheep gun (1200+ rounds per min on a 7volt lipo), however the gun is now not feeding when firing on semi auto. Feeds like magic on full auto, but only feeds one in 5 i would say on semi and tends to pool in the mag well (which it has never done before). Could this be remedied by adding a sector chip to the gear? or does it require something else? Many thanks Alicks (Link) http://www.patrolbase.co.uk/airsoft-m4-m15-m16-variants/cyma-cm-515-m4a1-carbine-w-keymod-handguard-black.htm#.Vl35S1f7tso

Hi all I have a CYMA CM515 (from taiwangun), i have skirmished with it afew times now and realy love the feel and weight of the gun, however the internals are obviously not great and i would like to get more range and accuracy from it. I have been toying with the idea of replcing the inner barrel and hop up with the Madbull ultimate hop and a python tight bore barrel. At the same time i have considered replacing the gearbox and motor with the Patrol Base own brand to give it better trigger response and power from the cylinder. I understand that for the cost of this i can go and buy a new gun however none on the market except the APS spyder (and no one seems to like APS at the moment?) realy appeal to me as i quite like the Keymod effect and shape of the gun. My question is would these fit into the gun body? Or would you recomend different products? Many thanks Alicks

I have the cheep EE tri shot from taiwangun and i have to say its very sturdy, quite consistent for a cheep gun, and has quite a good range on it. Also looks very cool. And served me very well on the last CQB game i went to.

I mainly explain it as: "Like paintball except using automatic electric or gas BB guns, often shooting in excess of 300-400 feet per second" they usualy ask: "Does that not hurt" And i reply: "Yes....Yes it does" They ask: "Why do you do it then?" And i reply: "Because its TACTICOOOOL!!"