All Activity
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
I prefer the guns modify pmags so selling these. 2 months old. Used with Salvo Precision MCX, no leaks.£155
London, Greater London - GB
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 20 hours
- For sale
- Used
Few scratches, comes with the adapter and the buffer tube. Can be used with any gun with a picatinny rail at the back.£25
-
Time Left: 6 days and 20 hours
- For sale
- Used
In ok conditions, the bottom part is scratched a bit as per photos. The muzzle device had the screw stuck inside, but can be used just fine and using rings as shims to orientate or thread lock. Mock suppressor edition with foam inserts. Tracer ready. Can be used as shield blast or suppressor.£30
London - GB
-
Time Left: 6 days and 20 hours
- For sale
- As new
Selling, as new 1x Titan Power Battery Charger and Reader £30 1x 11.1v 3500mah stick lipo battery Deans brand new £22 1x 11.1v 1400mah stick lipo battery Deans used little £18NO VALUE SPECIFIED
London - GB
-
Time Left: 6 days and 20 hours
- For sale
- As new
New unopened M170 spring for VSR spring sniper Price includes postage£12
- Yesterday
-
Time Left: 6 days and 20 hours
- For sale
- As new
Extremely stunning and hard to get gun. Has all the EDM .408 trades on the receiver. With the stock fully extended the length can go up to 130cm This gun is made by Ares, powered by Ares's TX spring system. It's based on the Windrunner M96 .408 sniper, but a big shame that this gun is a boneyard The gun can fire itself - the spring mechanism works as it should, but cannot feed BBs properly from the mag. The tip in the chamber, as circled in green in the picture, is supposed to release the BB spring in the mag when installed, but it is made of plastic and is broken Comes with the Ares CO2 bolt conversion kit. Fits into any Ares TX system spring rifle, like Striker series The gun with the CO2 kit cost over £750, and I'm selling them both for less than half price. It's a perfect choice if you don't plan to take it to field (I imagine few would take this thing) and just for your collection and display Shipping will be £15 extra. Collection in east London for no shipping cost. Has original box£330
-
Those are rookie numbers.... Still got room for a few more.... Like so..... (all my brit weapons)
-
Darkmikey22 reacted to a post in a topic:
Gun picture thread
-
Time Left: 6 days and 19 hours
- For sale
- As new
Qd sandman suppressor with steel muzzle.like new, one of my best Suppressor collection I got black and tan color, not sure if it can fit a small tracer. ONLY black available, tan sold£60
-
Terry10 joined the community -
Time Left: 6 days and 19 hours
- Wanted
- Used or as new
looking for EM G3's in size 32-34 doesn't matter if they have inserts or not£30
Durham - GB
-
Time Left: 6 days and 19 hours
- Wanted
- As new
As per title looking for a Dytac SAG chassis in magpul FDE. Let me know what you’ve got.NO VALUE SPECIFIED
-
Baser reacted to a post in a topic:
The 'What have you just bought' Thread
-
The 'What have you just bought' Thread
Spartan09 replied to Cameron364's topic in Guns, Gear & Loadouts
so, i have been neglecting to post updates for the past few months, so i will blast them all in one post.... i bought a laylax thread adapter to fit on my KWA beretta M93r from firesupport. (thank you @strykerles for the link). only downside is the threads are 14mm clockwise, and tracers are 14mm counter clockwise threads, but i was able to make an acetech fit through brute force XD then i bought the Umarex walther PPK and 2 spare mags from landwarrior and a Crusader silencer form airsoftworld to go with it along with it. currently trying to figure out a way to mount a tracer in the silencer without the inner barrel poking through and preventing tracer working (and without taking a hacksaw to it so i can use it without tracer at a later date if i choose) had to buy a new gun at AI500 in Flambards after i took a tumble and managed to snap my KWA Skorpion in two... so i bought the KWA Mac11 with spare mags... and it was the only gun i had with me at the event that didnt malfunction constantly.=/ i also bought a G&G ESG10 from my local surplus shop (who also sells some airsoft gear) for use at AI500, expecting more close quarters battles than i actually encountered, so it didnt get a lot of use.. plus i found the mag release is way too sensitive. whenever i had it slung on my back as a backup, it would constantly drop the mag, so it was mostly left at respawn to be used as needed, but i ended up just running the mac 11 all weekend after getting home from AI500, i bought a new reciever for the Skorpion from BZtactical, and have swapped the internals from the broken Skorpion, but now it needs fettling as i cant get the trigger to reset, and the valve knocker is sticky, so it wont fire at the moment =/ a shame, as i loved the little Skorp... evil little beastie deciding i wanted to display my guns, and consign many of the boxes to the loft, i bought a bunch of hookwall panels, brackets and hooks, which my brother and i mounted on the wall in my living room over the bank holiday weekend. need to order some different sized hooks and get another wall mount brracket as somehow had one missed out of my order, but they have been helpful when i contacted them. all bought from unishop.co.uk finally, i bought a WE Apache A5 from onlyairsoft along with a claw mount and 6 spare mags. to complete it, i bough a cheap red dot scope from Amazon and then a collapsible stock from KYairsoft which arrived today. hoping to run this tomorrow for the first time no pics at the moment as i cannot crop them down to meet the forum file size limits, and fed up of hosting the images from discord, only for them to stop working after a couple of days... -
Time Left: 6 days and 18 hours
- For sale
- As new
Two of the long 25 round mags for the VFC P320/M17/M18. Both have tan baseplates with Sig trademarks. Gas tight but haven't been fielded, pretty much brand new as you can see in the photo. £30 each posted and Paypal G&S'd, £50 for the pair.£50
-
Time Left: 6 days and 18 hours
- For sale
- Used
Replica PEQ-15 has white light, red and IR laser functions comes with pressure pad £20 Replica surefire torch comes with push button end cap, pressure pad and angled picatinny mount £20£20
-
VictorFourTwo reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Time Left: 6 days and 18 hours
- For sale
- Used
LPVO with its box and accessories. Optical clarity is great and the dot illumination works great. You can see the full spec below here: https://www.opticswarehouse.co.uk/vector-grimlock-1-6x24-gen-ii-sfp-illuminated-1-2-moa-vtc-3-rifle-scope I ended up preferring a fixed optic for a DMR build in the end, so this can be yours for £110 posted and Paypal G&S'd.£110
Edinburgh - GB
-
Time Left: 6 days and 18 hours
- For sale
- Used
For sale £515 including postage and fees. In original box. Originally purchased in May 2023, has been skirmished well. Purchased from High Pressure Airsoft in Scunthorpe. hasn’t been used in over 6 months because I just haven’t played. Happy to provide additional photos. Unable to provide videos of shooting due to no air, Sorry. Please contact me for additional information£515
, South Yorkshire - GB
-
Time Left: 6 days and 18 hours
- For sale
- Used
TM mp5 ngrs sd6 Comes with 5 mags. Inner barrel and rubber upgrade. Shoots like a dream 450 ovno. Will post at buyers risk Collection ideally. Or can meet I'm in Burton upon trent£450
Burton-on-Trent, Staffordshire - GB
-
For Sale - HPA - MTW Billet Series Tactical 10.3 black
Tackle replied to Arek_'s topic in High Pressure Air
@Arek_ your thread is locked, you need to make a new one in the correct category: https://airsoft-forums.uk/classifieds/category/12-hpa/ & also consider whether putting your phone number in the public domain is wise ?, number redacted for now. -
You have some lovely grips on that one James.
-
Killer Adam reacted to an advert:
UAX9 shell ejecting rifle
-
KristianYukhan joined the community -
For sale £515 including postage and fees. In original box. Originally purchased in May 2023, has been skirmished well. Purchased from High Pressure Airsoft in Scunthorpe. hasn’t been used in over 6 months because I just haven’t played. Happy to provide additional photos. Unable to provide videos of shooting due to no air, Sorry. Please contact me on WhatsApp for additional information:
-
-davo- reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
I won't lie, short range (3m for testing) accuracy is not great - from my testing maybe a 1.5" group at that range. It's understandably not as good as the 3.5 but I'm likely to add that back into the collection at some point, along with the upcoming 6" 🤞🏻
-
Doyley83 reacted to a post in a topic:
Ares 686 2" & 3.5" CO2
-
An Amorex style G series holster and Mag holder for my SSP18
-
Jamiet8790 reacted to a post in a topic:
VFC M249 Thread
-
You’re probably right mate, I have zero experience with co2 so literally have no clue. I’m just going by the description on the proact site about the bulbs, vs the thread size listed on the co2 site. Shame if it’s not right, 45g would have probably been a decent middle ground without much need to chop and change too frequently.
-
Time Left: 6 days and 16 hours
- For sale
- Used
3 x Tokyo Marui G17 V2 mags. all leak free and fully functional. £25 each plus postage. Or all 3 for £78 all in. Compatible will all generations of TM Glock. Will likely work on TM clones such as WE.£25
, South wales - GB
-
I'm going to say that from the picture those capsules are not the right thread size , you need M16 x 1.5 threads. The big 88g ones are the correct threads but are too long to fit in the box without modifying it. I've used adapters and smaller cartridges but found I went through them very fast .
-
I've used them a bunch of times and had no issues at all.
