All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- Wanted
- As new
Wanted please, give me a shout! Cheers.NO VALUE SPECIFIED
-
Just be aware that many (most?) sites will not accept that and will require the gun to be mechanically locked to semi.
-
Lozart reacted to a post in a topic:
What grinds your gears on forums
-
Cannonfodder reacted to a post in a topic:
What grinds your gears on forums
-
Hi everyone what would be a fair price to move on 2 UMP replicas that I bought on a whim and have never got round to using and have just sat forever in their boxes? 1 comes with extra UMP9 mags and the other with 9 UMP45 magazines Would £150 and £200 be fair prices based on the amount of magazines with each?
-
Mtemprell reacted to a post in a topic:
The VFC / Umarex HK416 Owners Thread
-
TheBrokenDeity joined the community -
It's not just the parts with diminishing returns higher than Danniella Westbrook on Colombian flake that put me off, there's also the hideous colours for the slide and/or grip that look like somebody committed an unholy act on a unicorn.
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
TAC41 Magazine Long (110 rds) x2 available £20 each. Both magazines have had the mag mod done to stiffen the retention of BBs. happy to post at buyers expense.£20
-
Galvatron reacted to a post in a topic:
What grinds your gears on forums
-
debaser87 joined the community -
Galvatron reacted to a post in a topic:
Chronoing Gas Shotguns
-
Tackle reacted to a post in a topic:
Chronoing Gas Shotguns
-
Most sites I've been to ask you to only load 1 bb and chrono that. At Blackstone they put a piece wood in front of the chrono and did this. To me this is the most accurate method
-
Different batches will have different parts. It's a bit of pot luck. V3/V2 just really refers to the big design improvements not the standardisation of parts used in the build. My first VFC was from 2018 it was all steel apart from the bolt carrier. I've since had a few more and everyone has been a little different. Lucky the parts are cheap and easy to source/install
-
Cannonfodder reacted to a post in a topic:
Chronoing Gas Shotguns
-
Tackle reacted to a post in a topic:
What grinds your gears on forums
-
Tackle reacted to a post in a topic:
Chronoing Gas Shotguns
-
Kurfew joined the community -
Time Left: 6 days and 22 hours
- Wanted
- Used or as new
As per title looking for a Double Bell Saiga 12 AEG to add to my collection if anyone has one they bought on a whim? JohnNO VALUE SPECIFIED
-
Austeyr reacted to a post in a topic:
What grinds your gears on forums
-
Time Left: 6 days and 21 hours
- For sale
- As new
Heretics lab article one Only bought in April used a few times at Savage arena all the dwell has been set Very air efficient comes with battery,box ,spare parts ,paperwork and a mag any questions message or WhatsApp 07355812797 £600 open to offers£600
-
Digital world joined the community -
Time Left: 6 days and 21 hours
- For sale
- Used
Fully custom AAP-01. TTI Stainless Hammer Set. Action Army Hop Unit with the infinite modification. CTM-TAC Grip Lower. CTM-TAC FUKU-2 Skeleton Upper. CTM-TAC Advanced Bolt. CTM-TAC Fully Adjustable Trigger. Full working condition - I've yet to find a mag that can keep up with the feed rate in full auto though. Used less than 10 times, but have moved into the Wolverine / Heretic Lab direction now. Leak free mag - unused. Home made modified De-Walt case. All the original AAP-01 parts and a few others such as a ghost ring sight. Free P&P.£250
Rawtenstall, England - GB
-
This advert is COMPLETED!
- For sale
- Used
AIRTAC AAP-01 / Glock HPA Adapter. Vertical type for an M4 mag. Used, but in great full working condition and has been leak free. Free P&P.£50
Rawtenstall, England - GB
-
Load the shell normally, get close to the chrono, and put the barrel so that only the top inner barrel will actually fire through the chrono. The other two should just smash against the table or whatever. Yeah it sucks, but like the others said if you just fire three BBs through the chrono it gives bad readings, but also if you fire with only one barrel loaded the gas vents out the other two and the measured power on that one BB is much lower.
-
AAP and Hicapa owners will sell you a gun with part names like the Shit Myself BigPP Short Stroker and act surprised when no one wants to pay used car money for it.
-
Chronoing gas shotguns is both easy and hard, depending on the kit on hand. As you've found, most site chronos struggle - the gas can upset them, as can multiple BBs going through the gates, which is how you end up with mad 5J readings. Lots of places will tell you to just load one BB and fire that, which is inaccurate the other way and often leads to lower readings (lots of gas will just escape out of the other barrels). The only way to do it really accurately is to use radar chronos (https://airsoftdirect.uk.com/product/valken-airsoft-chronograph-custom-chrono-x-radar/) but they're not especially common. FWIW if I chrono at home with multiple BBs, I often get 3J+ readings. If I chrono with one BB, it will usually show around 0.7J but if I chrono on a radar with three BBs it's around 1J.
-
Based on general experience, the gearbox from the people that made the gun should have a better chance of fitting directly and working properly - but there are no guarantees. The other thing I've found is that some V2 boxes in G3/G36/MP5 are subtly different than a standard V2 box (selector plate for one) so just check that before you drop coin on one.
-
The majority of the sites I’ve used a shotgun at have asked to load one bb into a few shells and chrono that way, not sure if that’s the norm but to me it’s the most logical
-
Hi All, Tried to search but couldn't find a topic on this Recently picked up a Gas M870 shottie that shoots in either 3 or 6 shots When I chronoed at home was putting out 5J on green gas on 3 shot - I've tried then to chrono with just 1 bb which was still showing 2.5j until I moved slightly further back (2-3inches - oooh errrr) from the chrono - then was getting 1J. I assume this was the unspent gas also exiting the muzzle and entering the chrono - skewing the data. My question: How do most sites chrono shotguns on the day? Want to try out my new toy - but dont want to be hit with a silly 20m MED because the chrono isn't reading right Cheers!
-
Time Left: 6 days and 20 hours
- For sale
- Used
Maruyama scw9 (apc9) fully working and upgraded. 6.01mm barrel, flamingo hop rubber, all internals have been polished to have a smoother action. Original outer barrel, new outer barrel with -14mm thread, spare back plate with 1913 piece for different stocks. Magpul k2+ grip, cut down foregrip. 3d printed suppressor. 4 long mags, 1 short mag, all gas tight and feed and stop on last round. Gun is fantastic, has really decent range for how compact it is. Also have a spare hop unit that I can throw in. £500 all in posted, torch and unity mount not included. the only trades I would want is a salvo mcx, lt or rattler. Any questions just ask£500
-
Time Left: 6 days and 19 hours
- For sale
- Used
Hey For sale is my custome built L119A1 off of a classic army m4 cqbr Has an inferno gen 2 engine installed Gate eon hop unit with maple leafe rubber and omaga nub Tight bore barral is unknown Copy surefire 556 can Old school kac grip and car 15 stock with rubber pad M300 tourch with pressure pad Aimpoint Painted up in old school early 2000's afghan paint scheme. Looking for around £500£500
High Wycombe, Buckinghamshire - GB
-
Time Left: 6 days and 19 hours
- For sale
- As new
Hey For sale is my gj G3k with backdaft phynix engine Has full auto and semi auto Comes with red dot Shoots nice and has a decent rate of fire Comes with 2 hicap mags Looking for around £250£250
-
I bought a used LCT G3 a few weeks ago with a plan to build it into a DMR. I don’t know a lot about the history or age of the gun, it doesn’t have a MOSFET or quick change spring. Original idea was to send it off to have it built into a 450fps semi only DMR with a few choice upgrades but I’ve come across a few V2 gearboxes (one made by LCT) with a MOSFET and quick change spring already part of the package. Will these just drop straight into the gun or need additional work to make them work? The LCT version looks like the upgraded version of what’s already in the gun so should be fairly easy to swap over but I’ve also seen the Cyma platinum complete gearboxes. I have two Cyma Platinum MP5’s and they shoot incredibly well for what they are. Both gearboxes are under £130 which seems like a cost effective option and basis for a good DMR build if it’s “that easy”. Interested in the MOSFET so I can program it to semi only and the quick change spring will allow me to tune the power and easily return it to a sub 350fps gun should I want / need to run as a full auto rifle in the future.
-
Time Left: 6 days and 19 hours
- For sale
- Used
In great condition only used for one game. Comes with 2 perfect leak free mags.£120
- GB
-
Likewise. I think they were the first company that I bought batteries from online. I have had one duff battery from them; they sent a replacement the same day I reported it to them and did not ask for the duff one to be returned.
-
brooh joined the community -
Another vote for component shop. I've used them for years and are usually my first stop when looking for anything battery related
-
Time Left: 6 days and 13 hours
- For sale or swap
- Used
Fully Licensed VFC Avalon Gearbox - rewired to Dean's and blade connecters for easier disassembly. Quick Change Spring This Airsoft Electric Gun is built to a stunning standard under full license from Sig Sauer, made by VFC with the Avalon Gearbox. Not only do you get a rock solid exterior, but a quick change spring system, steel tooth piston and rotary HOP Unit are a short list of what awaits inside. RRP £589 - https://www.davescustomairsoft.co.uk/sig-air-vfc-sig-mcx-virtus-aeg-black Prefered sell sites - Manchester - F&O TOP SECRET Newcastle - No LIMITS AIRSOFT. Reluctant to post but can arranged at buyer's cost.£320
- GB
.thumb.jpg.1cb9b5570620a4a63da29082775a3ead.jpg)
