Jump to content
Registrations are working again

All Activity

This stream auto-updates

  1. Past hour
  2. danf1234

    Time Left: 6 days and 23 hours

    • FOR SALE
    • NEW

    This is something very special, and I am in no rush to sell so no crazy offers or trades please. I am selling my Longbow SRS anniversary addition that I purchased last year and have had on display since but never taken out of the house. It comes with: *****Please note I have replaced the vortex venom scope with a hawke vantage 3-9x 40 scope which is much more suited to Airsoft. Nuprol carry case 5 cerakote mags with the upgraded followers .45 & .48 ammo which the gun has been set up to use by longbow. Silverback Display stand. 2 double mag pouches in tan. Here is the original link of the gun when I bought it last year. https://www.longbowbb.co.uk/product-page/longbow-7th-anniversary-srs-the-devil Here is the upgraded spec Silverback Covert Rifle Professionally Cerekoted Receiver, Handguard & Magazine Hawke vantage 3-9 x 40 IR illuminated mill dot scope. Laser engraved "7th Anniversary" EdGi Silver handle & cylinder Laser engraved "7th Anniversary" EdGi Stainless Steel 420 True Dualbore inner barrel EdGi SAP Piston with 150g weight Silverback Classic Dual Stage Trigger Silverback Fasthop Silverback 70 Degree Bucking Version 3 Chub Nub Silverback 120nm Spring Silverback G-Spec outer barrel Silverbackl G-Spec A1 to A2 G-Spec adaptor Silverback Carbon Outer barrel/Suppressor Silverback Carbon Outer Barrel Foam Baffles Silverback Full length top RIS rail Silverback SRS Stand I am wanting £950.This will need collecting in York, and considering the value it is the most sensible option for both parties. I would want to see it in the flesh if I was buying it.

    950.00 GBP

    - GB

  3. Today
  4.    HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  5. Socks
    Wonder if there is a GBB version coming out?
  6.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  7.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  8. Jennifer Gates
    I’ve used custom patches before and I really love them! The quality and design options are fantastic.
  9.    HZR13 reacted to a post in a topic: Airsoft site in London which is approved under UKARA
  10.    HZR13 reacted to a post in a topic: Airsoft site in London which is approved under UKARA
  11.    HZR13 reacted to a post in a topic: "Bristol Airsoft", formerly at The Old Crown Court in Bristol, taking over The Mill in Melksham from Lock and Load Airsoft
  12. SludgyPenguin75

    Time Left: 6 days and 22 hours

    • FOR SALE
    • NEW

    Ares MSR 338 - skirmished once. with 2x50 round mags, ares QD suppressor and scope has an upgraded trigger set with upgraded seat in it, original is fine and will be sent with it. internals all Prometheus. shoots very accurate, 328fps on a 0.40gbb - 2joules

    350.00 GBP

    IPSWICH, Suffolk - GB

  13.    HZR13 reacted to a post in a topic: Gun picture thread
  14.    HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  15.    HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  16. Ronin0033 left Positive feedback for Scott Clark
  17.    HZR13 reacted to a post in a topic: What have you made?
  18. rj1986
    Babies are almost impossible to upgrade though. And they hate the HPA hose being attached,
  19. Scott Clark left Positive feedback for Mini airsoft
  20. Scott Clark left Positive feedback for Ronin0033
  21. Lyndication
    https://www.usedairsoft.co.uk/other-equipment/baby-name-prediction-by-date-of-birth-and-time_i85842 Insane deal for £1500, I could do this for you for a tenner.
  22. KirbyHCI
    I'm not sure the name Bristol Airsoft exactly fits anymore, and it's a bit far for me, but this was recently announced and I thought it worth posting about here just for folks to be aware!
  23. SixOfDiamonds
    Think I might have found one, price isn't so good over here though. https://evike-europe.com/98228.html Appears Evike have a european store, would be cautious of the shipping/import costs
  24. Galvatron
    Ignoring Ares' less than desirable repuation, it's cheap because the HPA engine & gearbox assembly were manufactured to keep costs down so you lose a few features compared what you'd usually see from Wolverine or PolarStar. It uses a low-cost solenoid and its delay can't be adjusted so your firing rate is capped (no wanker guns on a budget). You can't fine tune the volume of air inside your inner barrel to suit its length either (fixed dwell) so you have to rely solely on the pressure from the regulator to control the muzzle energy while being conscious of joule creep. A really good write up was done before so it may be worth a read.
  25. Yesterday
  26. Cannonfodder
    As above. I don't think there are any sites in greater London since Bunker 51 closed last year so you'll need to look further out. Where abouts are you from?
  27. Galvatron
    Are you talking about just the switch pad and not the cover? Ali Express might have something similar as it sells switch pads individually, both for 2.5mm and 3.5mm.
  28. Hallopp
    Im looking at buying an ARES HPA PRE BUILT GUN Ares Amoeba M4 Tactical (ARES-AM-008-DE - Tan) - HPA Engine Pre-Installed https://www.bespokeairsoft.co.uk/ares-amoeba-m4-tactical-ares-am-008-de-tan-hpa-engine-pre-installed What are people thoughts ??? seems odd its that cheap
  29. Realist4030

    Time Left: 6 days and 12 hours

    • WANTED
    • USED

    Will pay postage if needed

    8.00 GBP

    London

  30. MistakenMexican
    Are you sure those are AEGIS kits? the two I owned came in a grey padded box with AEGIS written on the front…
  31. MistakenMexican
    Toxicant nineX19 kit
  32. Csummers
    Csummers joined the community
  33. Galvatron
    In all likelihood you'll have to search further afield of Greater London. With a premium for leasing/buying property or suitable woodland, running an airsoft site in London isn't sustainable. Bunker 51 closed down a few months ago. It's worth checking this site out: https://playairsoft.uk/map It's not an exhaustive list but there are options just outside Greater London accessible by public transport and a shortish taxi journey away (I assume you don't drive).
  34. carpio
    Hi all, I am looking to get the UKARA player registration. Hence, I need to take part 3 games in an UKARA registered site. However, I failed to find any list. Is any one able to tell me which site is approved by UKARA in London city? Thanks
  35. carpio
    carpio joined the community
  36. BigAl
    HI mate, would it be possible to fit a limo inside this?
  37. Hallopp
    Hallopp joined the community
  38. Wbuli
    Wbuli joined the community
  39. Austeyr
  40. Enid_Puceflange
    Argh fuckitty fcuk! 😩🤣 Great Price 👍
  41. danp96

    Time Left: 6 days and 10 hours

    • FOR SALE
    • USED

    Non firing but largely in good condition externally. £50 posted with fees

    50.00 GBP

    - GB

  42. Ronin0033

    Time Left: 6 days and 10 hours

    • WANTED
    • USED

    WANTED - Triangle Handguard Collar for M16. Doesn’t matter if it has the smaller holes in the picture, just the big middle one! Anyone got a spare kicking around before I buy a new one?

    12,345.00 GBP

  43. ArranLH

    Time Left: 6 days and 10 hours

    • FOR SALE
    • USED

    Deadly customs hicapa holster originally tan but was painted. paint can easily be removed if you want it back to tan or just give it a re-spray comes with mid ride mount and leg strap price includes postage

    45.00 GBP

    - GB

  44. ArranLH

    3 x PTS EPM Magazine

    ArranLH posted an advert in Parts

    Time Left: 6 days and 10 hours

    • FOR SALE
    • USED

    3 x PTS EPM 150 round magazines Price includes postage

    50.00 GBP

    - GB

  45. ArranLH

    Time Left: 6 days and 10 hours

    • FOR SALE
    • USED

    3 x PTS EPM - MTW 120 round magazines Works with MTW Empty mag detection Price includes postage

    50.00 GBP

    - GB

  1. Load more activity
×
×
  • Create New...