Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Kls77
    Right people iwh gen2/3 nvgs What ir flashlight do u use 850. 940?? Is it true that gen 2/3 can not see light over 940nm? Cheers in advance
  3. Impulse
    That's really good to know. I might pick a few up in that case for the rest of my mags (would be nice to get all 6 short mags to a more usable state. Got 4 there at the moment)
  4. slinkythought left Positive feedback for EXIT
  5.    Impulse reacted to a post in a topic: G&G m700 knock arm and plunger set issues
  6. Fatboy40
    I've spoken to them / him and the response was... I’ve forwarded the below including the pics to Hadron who assure me that these are just machining marks that very few of the units will carry. These won’t have any bearing on the performance of the unit. ... so I'm happy to go ahead and install it, but will stop if I feel the inner barrel catching at all. The response also implies that some other purchasers of it will have the same marks. I'll probably install it during next week and then pop down the farm my brother works on to test it safely at range in a quiet field (and compare it to my DMR). Also in your last photo that's certainly not one of the assumed side arms to go with a sniper. It's good to be different though 😃 (I run an AAP-01)
  7. ButcherBill

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    Railed Handguard for Masada, great condition with little to no wear. £50 ono

    50.00 GBP

    , Scotland - GB

  8. Kls77
    Right people iwh gen2/3 nvgs What ir flashlight do u use 850. 940?? Is it true that gen 2/3 can not see light over 940nm? Cheers in advance
  9. ButcherBill

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    Used D-Boys stock, bought for a Cyma Scar-L but it doesn't fit the Cyma. Shows wear from use but works as it should.

    20.00 GBP

    - GB

  10. iSkyeLuna

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    Comes with all stock attachments, base mount, riser plate etc. Is missing the original screws as one of them stripped on me. Screws for the Arisaka mount are fine. 4XT Pro works great, has no marks or anything.Comes with 1 Lithium battery installed. Price includes postage via RM Next Day by 1PM shipping etc. Paid via PayPal G&S. I don't plan on splitting these right now sorry. Where I got these from: https://xtremetactical.co.uk/products/sig-sauer-romeo4xt-pro-red-dot-sight-2-moa-ballistic-circle-dot-black https://www.landwarriorairsoft.com/product/arisaka-defense-aimpoint-micro-mount-mk2-193-214604

    500.00 GBP

  11. triggerhappyLB

    Time Left: 6 days and 23 hours

    • FOR SALE
    • NEW

    2004 western arms 1991a1 military model. A very nice, rare and in immaculate condition WA 1911a1 with 2 gas tight mags I've decided to sell one of my western arms guns to help fund a build project. It's in perfect box fresh like condition, never skirmished. Both mags are gas tight. Gun runs on 144a and is chronoing at 206 to 210 FPS on .2 (0.34j) Looking for £140 plus postage or you're welcome to collect from b75 area of Birmingham, I always encourage it where travel permits. Happy to provide videos and further photos too

    140.00 GBP

    Bitmingham, West midlanda - GB

  12. ButcherBill
    They have serial numbers? Didn't realise there were serialised... kewl.
  13.    ButcherBill reacted to a post in a topic: Gloucester prison
  14. Today
  15.    HZR13 reacted to a post in a topic: Interesting new product round-up
  16.    Gunboat Diplomat reacted to a post in a topic: Macks airsoft dreamers of the week thread
  17.    HZR13 reacted to a post in a topic: Getting rid of Airsoft gear
  18.    HZR13 reacted to a post in a topic: Getting rid of Airsoft gear
  19. ButcherBill
    There is a great classifieds section with these forums, there is also an appraisals section if you need help with pricing. The rule of thumb is 60-70% of current retail price, + or - depending on condition for the same RIF you have to sell, accessories don't seem to add much value so it they are good-uns sell them seperately (60-70%) or sell with the rif. Take plenty of pics so buyers see what they're paying for, include pics of any damage/scratches etc too. Basically be realistic with what you want £££ for your kit as you can ask for any amount but you may need to be flexible with your prices with any offers you get.
  20. Austeyr
    You'll have better luck selling each thing separately such as the AEG with the mags, Battle belt, Speed loaders etc. Whilst it's slower, the likelihood of somebody wanting everything you have at once is very, very, very slim. If you're selling here:
  21. CWG22

    Time Left: 6 days and 22 hours

    • FOR SALE
    • NEW

    Comes with T1 and mount has Modify Tech hop unit

    300.00 GBP

    Deal

  22. MaximusDecimus
    NOT A SALE POST - I had a short lived time in airsoft, got myself kitted out and only played a couple of times. I’ve got an AEG, 6 AR mags, battle belt, Odin speed loader, normal speed loaders, loads of hi capa mags, sling, gloves, face mask, BBs and gas. Do people sell or buy bulk packages like this? Just want it all out of my room not sure if I should sell individually or all together. Any tips on this are general selling would be great
  23. ButcherBill
    i'd have it myself but a bit skint, I'm sure I saw a wanted add for one tho.
  24. MaximusDecimus
    MaximusDecimus joined the community
  25. Krisz

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    "Built" by High Pressure Airsoft last year but not getting used so it has to go. This is a Well Pro body not VFC! Internals: -Wolverine Inferno engine with Spartan FCU -Either ZCI or XT 6.02 inner barrel (can't remember which one) -4uad hop up bucking and nub -Amped Airsoft IGL 100 PSI gives you 345 fps on 0.20g which is not bad on such a short barrel. If you fancy tweaking dwell you might able to get even better results. As you would expect it shoots lasers. Small li-po battery included. If you have any questions please ask away here. Ty for looking.

    410.00 GBP

    - GB

  26. triggerhappyLB

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    Listing my ICS LWRC m6a2 to help try and fund a new build. Licenced LWRC M6a2 by ICS £300 plus postage via PF48 Has a gate aster fitted Genuine Magpul mbus front and rear flip ups Genuine Magpul RVG grip AEG with blowback unit (gives it a nice "clack") Replica eotech included (has a habit of flicking between red and green) Working peq box included- working red laser and led torch with pressure pad Torch NOT included (may consider selling it for an extra cost if buyer is keen on it) Will come with 1x highcap stanag mag with Magpul pulmag maple leaf rubber in it too when it was serviced last year. I've used this as one of my cqb guns and at sixmil. The attention to detail on this to get it to look and feel like the real LWRC M6 by ICS is brilliant. It's rock solid, night weight to it and very comfortable to run. However, this does unfortunately lead onto it's negatives. The charging handle has snapped. It's NOT a standard AEG type. It mimics a real steal one in that it simply hooks over the mock bolt internally, but, it's smaller than a genuine one (I've bought a gbbr charging handle and it's too big) I've tried on multiple occasions to replace it for a new one but I've so far been unable to to source one. Second issue (very minor) the butstock cap is fixed with a press stud which has come loose resulting in it failing to secure fully. I secure it with a heavy duty Velcro strap and never have any issues with it. Very minor and something that could be fixed easily, it's just never bothered me. I've still got the charging handle somewhere safe, and I will include it. I've been meaning to glue it in place as it serves no purpose apart from opening the dust cover, but as this is EBB the gun does that itself on the first shot, you just have to move the mock bolt backwards to operate the rotary hop. Shoots very well, straight and is nice and snappy. Will genuinely be sad to see it go, but the new one will be it's replacement. I'm in the b75 area of birmingham. You're welcome to collect and always encourage it where possible to have a try first.

    300.00 GBP

    Birmingham, West midlanda - GB

  27. ButcherBill
    Hope they do a chrome version for the "pity the fool" A-Team loadout.
  28.    ButcherBill reacted to a post in a topic: Interesting new product round-up
  29.    Lozart reacted to a post in a topic: M4 RIS Handguard
  30. g2building
    g2building joined the community
  31.    ButcherBill reacted to a post in a topic: The 'What have you just bought' Thread
  32.    ButcherBill reacted to a post in a topic: The 'What have you just bought' Thread
  33. Jalal

    Time Left: 6 days and 22 hours

    • FOR SALE
    • NEW

    Ares SR25 EFCC AEG. Ex display but hasn’t been used and works fine great price knowing it’s £550 new plus it’s been discontinued 07599129298 Collected from newham or posted thanks

    250.00 GBP

  34. novioman
    Still not got the renew option unfortunately, just have to relist your for sale items at the moment.
  35. Ronin0033
    I can’t comment on the G&G ones, but the Action Army knock arms work on the old Tanaka mags perfectly well if you did decide to “upgrade” them (I’ve installed 2 on my Tanaka long mags).
  36. EXIT left Positive feedback for Devvo
  37. EXIT left Positive feedback for slinkythought
  38. EXIT left Positive feedback for feable core
  39. Jcoles

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    Items included Krytac Kriss vector *modification* Air tech studios speed trigger Laylax Prometheus 6.03mm 310mm extended barrel mock suppressor Stubby foregrip Goetland red dot sight Stubby torch with padel switch Green and black spray colour scheme Vorsk hi capa 3.8 vengeance (brand new) 2x hi capa magazines 2x tins green gas Nuprol hard protective case 4x Krytac vector magazines 5x deans lipo batteries ASG charger AC5000 chrono 15x bottles of various BB’s Multiple speedloaders Multicam helmet Various protective eyewear Retevis comms headset Dynatex blank firing impact grenade Half a box of blanks 6x one time use grenades Plastic knife Ruck sack to fit accessories XL osprey vest Multicam (ex military) with front molle Velcro pads 3x mag pouch Dump pouch Various L/XL Multicam clothing/waterproofs I think that’s everything 😅 Anymore picture or info needed just ask

    900.00 GBP

    Mansfield, Nottinghamshire - GB

  40. Leeton

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    Its in full working condition, other than a broken part of the hammer which is shown in the picture. It comes with a holster. I do have a real Glock 19 gen 5 magazine, with 15 inert rounds if wanted as well. that will cost 30 extra. No magazine included. Feel free to send me offers

    60.00 GBP

  41. Ronin0033

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    For sale, WE gas drum mag for M4/M16/SCAR-L/SA80/anything WE that takes Stanags. Fully working. Currently HPA tapped but I can put a green gas valve in if required. £60 posted

    60.00 GBP

  42. Ronin0033

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    For sale, WE FN SCAR-L Mk16 gas blowback rifle. I recently got an another one of these with full trademarks, so this one is now surplus to requirements. Upgraded with a Maple Leaf 300mm crazy jet barrel and Laylax rubber. Also has a DP aluminium nozzle with NPAS. Runs lovely, likes green gas or stronger. Comes with 2 leak free mags £300 posted or collection from Swindon.

    300.00 GBP

  43. jordan20210
    jordan20210 joined the community
  44. MattC25

    G&G CMF 16

    MattC25 posted an advert in Electric Rifles

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    G&G CMF 16 4th Gen MOSFET Ambi controls Bolt lock & Rotary Hop Has programmable 3R burst 320mm barrel with 6.08mm bore M-Lok handguard Paint has started flaking in some areas, shown on photos

    140.00 GBP

    Congleton, Cheshire - GB

  1. Load more activity
×
×
  • Create New...