All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
WAS DCS Plate carrier in coyote brown - large 2x utility pouches 1x assaulters back panel 5x 7.62 open elastic mag pouches (fit 556 fine) 2x dump bags 1x scrote pouch 1x single point sling 1x weapon retainer X-PRED LVLIIIA Soft Plates All WAS kit. £350 plus postage350.00 GBP
WAKEFIELD, West Yorkshire - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
This is a set of shirt and pants in digital desert camo, issued to the United States Army in Afghanistan and other dry combat zones. It is suitable for collectors of militaria or those looking for surplus/ equipment for outdoor activities. I am listing both the shirt and trousers together, shirt is a medium and the trousers should be around a 36, which is adjustable by velcro straps on each side. Kneepads included. Item is made in china and is an airsoft/Milsim replica. Never worn, bought for a Mil-sim event and never used or worn. SHIPPING -- Happy to ship with buyer preference, they must cover the price.46.16 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
New Unused US Indian wars Reproduction Reenactment Cavalry Uniform I am listing a complete Historically accurate US cavalry uniform made of 100% historical wool and linen+webbing and leather materials, these are made by a Historically accurate reproduction uniform company everything shown is included in the listing. All items are accurate and really well made with care. These items have been kept in a clean environment inside zipped up bags since purchase they have not seen use or wear, the reason I am selling them is I am no longer interested in reenacting this period and I want to free up space in my collection. The uniform would be worn by a cavalry trooper during the 1800s indian wars (post US civil war) The hat insignia is depicting the 4th cavalry however the uniform has been left un-altered so any rank up to officer may be applied with little uniform changes. The only items required to complete the full kit would be a pistol belt and cavalry boots. sizing: Easily fit medium-large UK male sizes hats- 58cmtrousers-36-38jackets-40shirt-mediumjacket-medium-large SHIPPING - happy to ship with who you want, buyer will need to cover shipping. A FANTASTIC wild west Mil spec cowboy loadout.482.16 GBP
, herefordshire
-
I have an A&K M249 Para. When it feeds it's great fun, but it is a heavy beast to lug about. Unlike the average carbine/rifle, there is NO point in chasing ultimate accuracy or rate of fire; the whole point of the things is to lay down a field of suppressing fire. The main thing to concentrate on is a) does it feed, and b) do I have the strength/stamina/sheer bloody-mindedness to lug it about all day.
-
Lozart reacted to a post in a topic:
Current LMG of choice
-
Lozart reacted to a post in a topic:
Those of you who have Rhodie Painted your pews...
-
Lozart reacted to a post in a topic:
Those of you who have Rhodie Painted your pews...
-
Lozart reacted to a post in a topic:
Those of you who have Rhodie Painted your pews...
-
WW2 Imperial Japanese Army Reenactment FULL Uniform replica Medium
AppleAirsoft posted an advert in Gear
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
Selling a never worn Replica ww2 Japanese army kit, the Uniform itself is a 3/2 length sleeve tropical summer uniform, Sizing is a medium but its designed to be loose fitting, Listing includes: Havelock Cap Winter hat General use Gloves WW2 Replica Tabi (hard to find) bread bag putties tunic summer (3/2) (with insignia) Water bottle+strap trousers summer (size 36 waist with adjustable belt) Cloth Map case knee mortar pouches leather webbing belt spare insignia patches All items basically bought and then not used If you would like more info on sizing please let me know, included is basically everything a reenactor or collector needs except a helmet backpack and bayonet. items bought from multiple sellers and reenactors. Again items unused and in good condition. SHIPPING - buyer will pay, Happy to organize it please let me know your preferences.436.00 GBP
, herefordshire - GB
-
Lozart reacted to a post in a topic:
Those of you who have Rhodie Painted your pews...
-
Lozart reacted to a post in a topic:
Those of you who have Rhodie Painted your pews...
-
Isn't the Fixie LT a 14.5" barrel, though?
-
OwenFoster joined the community -
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Selling my AK74, hasnt fired much, only taken to one match in the end, some bits of paint are worn, only issue with it is the trigger retention pin is missing which is a small spring, very easy fix, I highlighted the required spare from the CYMA spare AK gearbox springs set. any questions please ask. quite cheap for the price and how easy it is to fix but needs must. SHIPPING - Happy to ship, let me know your preferred company and ill try find one locally.81.00 GBP
, herefordshire - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Selling my AK74, hasnt fired much, only taken to one match in the end, some bits of paint are worn, only issue with it is the trigger retention pin is missing which is a small spring, very easy fix, I highlighted the required spare from the CYMA spare AK gearbox springs set. any questions please ask. quite cheap for the price and how easy it is to fix but needs must. SHIPPING - Happy to ship, let me know your preferred company and ill try find one locally.81.00 GBP
High Wycombe, herefordshire - GB
-
Baser reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Chest rigs with rear carry capacity
Lozart replied to Gunboat Diplomat's topic in Guns, Gear & Loadouts
I have the 901 with a back panel, and yes, it has ALL the capacity. All I would say is that while it is a chest rig, it is quite well padded and can still be quite bulky and sweaty (despite having "spacer mesh" type backing). Most of the Spiritus Mk3 or 4 or the Haley DC3R type chest rigs will let you attach it to a MAP style assault pack (there's loads of knock offs floating around). The pack straps basically replace the chest rig straps. Alternatively, take a look at the WTF stuff. They started out making tacticool gear for paintball so they have a number of air tanks specific pouches and packs (including a 13ci pouch that will sit horizintally on your belt if you want to get shot of the backpack completely). They do a range of modular chest rigs, and having used their gear, I would vouch for it over Chinese Spiritus clones! https://www.wtfidea.com/air-tank-pouches/ -
AppleAirsoft joined the community
-
Another option is get a used traditional g&p upper , they do pop up from time to time.
-
Lozart reacted to a post in a topic:
Chest rigs with rear carry capacity
-
PopRocket123 reacted to a post in a topic:
G&P mid-length outer barrel
-
If you can't find a taper barrel the right length, you could try one of these: https://www.firesupport.uk/gp-taper-outer-barrel-adaptor-for-aeg.html and a regular barrel.
- Today
-
Time Left: 6 days and 22 hours
- FOR SALE
- NEW
Shooters Designs TM G18C. *this has been made with a number of Gucci and discontinued expensive parts, such as the slide and sights.* Flawlessly working. Shooters designs G18C kit Guarder lightweight BBU Guns modify V2 nozzle Guns modify piston head DP stainless body pins Guarder new gen steel lower Guarder extended stainless slide catch TTI g18c hammer internals Fowler industries trigger PTS FREYA Magwell CCT guide rod Hybrid tritium sights Guarder hop unit and barrel Maple leaf i bar AM steel hop arm ML hop rubber Would sell with one TM V2 mag as well. It’s over £600 in parts. Was built from scratch, so all parts are aftermarket and more robust than OEM. the steel internals would give you great longevity if using CO2 or HPA. £415 all in. Includes guaranteed next day delivery. The slide, sights and Magwell are all discontinued and hard to get. The shooters designs slide comes from an era where glock slides were made to the same standard as new AM and GSB hicapa slides… they’re flawless. Happy to provide a cost breakdown if want to see why the price is so high. apologies the time stamp is a little out of date, was hoping the classifieds upgrade would be done by now.415.00 GBP
- GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- NEW
Selling my boresight customs TM G17.5 MOS. Sold as seen. It’s a TM G17 gen5 MOS with the following upgrades/parts: Detonator BSC slide kit. RMR MOS plate CCT piston lid CCT upgrade spring set CCT chrome guide rod Guarder lightweight BBU DCI high night sights Guarder Ambi steel slide catch Maple leaf hop rubber Guarder tight bore barrel (6.02 I think) Hadron H fang It’s over £500 in pistol: pistol was ~ £200 the slide kit was ~£280 the night sights were ~£50 from Japan. RMR plate ~ £30 Ambi slide catch ~ £20 lightweight BBU ~ £20 piston lid and spring set ~ £15 Hop upgrades ~ £30 Will come with original box and 1 V2 magazine for £355 all in. Including next day shipping. It’s fully working and only being sold because I don’t use it. Only other upgrade I’d recommend is the TTI hop unit. It will massively reduce your groupings and has the potential to increase your range considerably. the time stamp is a little old because I was hoping the classifieds would be upgraded by now.355.00 GBP
- GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
The gun itself £649.99 (defcon price) Full steel FCG (W&S hammer, not sure about the rest) £?? Can't remember honestly, not included in the price Hephaestus 1 piece trigger £30 (eHA) Hephaestus steel barrel £37.91 (WGC) Full travel W&S steel bolt £154.95 (milspecsol price) Clutch precision Aluminium TDC Hop-Up £41 (fire support) LCT polymer furniture + gas tube £31.36 (WGC) 3x GHK 5.45 Magazines £40 each Total = £1065 put in Adjusted for second hand rate = £745 (includes shipping) *freebies* 2 spare OEM magazine shells with baseplates The Original wood furniture and gas tube 3D printed repair parts (some used in the current 5.45 magazines)745.00 GBP
-
HZR13 reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Many if not all paintball type lenses (at least when sold as a replacement) have a peel off protective layer (maybe inside and outside), which is often left on including those who should know better At tournaments in the ‘upper’ leagues I have often seen players complaining about their new lenses until a team mate points out the inner layer My problem is the opposite - buying new shiney mirrored lenses from the traders at a tournament, then fitting them straight away and instantly destroying the mirror layer with my camera instead of leaving them for gameplay Some dual panes can have their antifog seal beak down changing them to fog creators, if it’s a ‘thick film’ type inner pane then one solution is to peel away the inner pane —- but if that’s happened it’s probably about time to replace anyway I would be wary of cutting the inner foam, it is a component part of the eye protection seal, and though it would be rare BBs can arrive in strange directions. (I’ve not seen with full face, but I have seen marshals take a BB into the eye area of glasses and small goggles (luckily with all the energy absorbed bouncing along the way) In theory a sealed face area around the eyes can be the cause of sweaty fogging, therefore more airflow could reduce that But I would repeat the advice of cat crap and other anti fog solutions on both the inner pane and on glasses (Note that once you put treatments onto the lens you also reduce the effectiveness of any manufacture antifog coating
-
The 'How Did Your Airsoft Day Go? Thread
Gunboat Diplomat replied to Skara's topic in General Discussion
This one is a week late as it was last Sunday that me and the boy visited the Gaol in Oakham. With news of their precarious future I rushed to get a booking in for November, fortunate that I did since most (if not all by now) of their remaining dates for 2025 are full. It has always been on our list, but the common refrain of ‘we should go there one day’ meant we never got round to it. We arrived later than planned due to bad planning and the place was packed as it was a sell out day. Nonetheless we found a space to set up and the staging area (in what I assume are the old administrative buildings of the prison) are well equipped, even if they do look like the backdrop to a public information film from the 80s. The games started with by far the longest briefing of any airsoft site I’ve been to. As it was my first visit I didn’t mind too much but I could imagine as a regular it would drag. Still it must work for them as the general conduct of play was some of the best I’ve experienced and everyone whether new or regular knew what they were doing. I’m not a snooty mil-simmer, but everyone knowing the basics of cover, movement and controlled fire really helped to sell the immersion when sweeping through corridors and clearing rooms. Mix of games revolving around moving and static objectives were played. I won’t describe them in detail as it never comes across as well in text, but I will say that the Gaol is a really challenging site. Most airsoft games tend to be won by force of will as much as by tactics, with the most aggressive play usually resulting in the win, but the Goal requires a lot more planning and coordination. There are a myriad of routes around the site and in and out of buildings, some incredibly hard to breach defensive positions and a maze of corridors to navigate. Ambush, flanking and friendly-fire are all likely, sometimes simultaneously. The skill ceiling is sometimes pretty low for airsoft sites, but I think the Goal would encourage you to become a much better player as a regular. I took my Ghetto Blaster which ran flawlessly despite being chilly, switching to my backup M906 in the afternoon just because I’d charged the batteries I didn’t want to bring them home full. The boy brought the £20 boneyard Double Eagle (that’s now 4 Double Eagle products we own!) shotgun I bought him a couple of days earlier - surprising it ran like a champ all day and now seems to be his new favourite. -
I'm planning a build based on the Munition Works Fixie LT. I'm using a G&P as a base that uses the tapered fitting for the outer barrel which already limits my options. The tricky part is that the magpul handguard I want to use requires a barrel with a mid length gas system in order to fit (yes I know there's a carbine length version of the same handguard, I prefer the look of the longer one). I've found a barrel that looks like it would work for a mid length but it's hard to confirm without just buying a selection of barrels and seeing what fits. Has anyone used this particular barrel before or have you found another one that definitely has the mid-length gas system? If I can't find on I have a 10.5 with a carbine length gas system that I'll just chop and add the length to. https://gpairsoft-uk.com/eshop/product/gp-11-5-taper-outer-barrel-for-gp-front-set-ras-aeg-black-gp-brl040/
-
KieH joined the community -
This advert is COMPLETED!
- FOR SALE
- NEW
Well used but still got attaches fine £18 posted18.00 GBP
- GB
-
Time Left: 6 days and 21 hours
- FOR SALE
- NEW
Used a few times but now sat in a box unused £18 posted18.00 GBP
Bognor Regis, West Sussex - GB
-
Alright, let's see if this works... I'm guessing it won't embed the videos, but here are two 25 seconds(ish) videos of the issues, with two separate uppers. The problems are twofold: 1. The hammer only half engaging for whatever reason and needing to be manually reset 2. The trigger not working at all (you see it more towards the end, there's an audible click of me pulling the trigger but the hammer doesn't move at all) https://drive.google.com/file/d/1tdP9tSS0cFEZfAkXiTLAg2VqMiA3nhiK/view?usp=sharing https://drive.google.com/file/d/1Xn6JNRZ93pxAzfOMvgNOoNae8QffLKxn/view?usp=sharing
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Used a few times but now sat in a box unused £18 posted18.00 GBP
- GB
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
We xm117 only fired it 3/4 times on a range to test the mags ect. Only selling to start new project .Comes with 7 short 20rd mags and 4 30 round mags . One 30round leaks abit and has from new apart from that all in very nice working order and has been maintained. Bayonet lug has been shaved down abit so suppressor can fit on the rifle . See photos price includes uk shipping480.00 GBP
Exeter
-
Time Left: 6 days and 21 hours
- FOR SALE
- NEW
Free rifle bags, used, and one of the plastic ring for the strap has been replaced with a carabiner. No longer needed and rather than throwing them away, figured someone may want to give them a home, please cover postage plus whatever you'd like, probably something like £10 all in kinda thing.Ask for price
-
Time Left: 6 days and 21 hours
- WANTED
- USED
Looking for a cybergun Inoksatu 1911 as pictured. Money waiting for one in great conditionAsk for price
-
Long as it's not just me, I'll wait till it's sorted and catch up then. Thanks.
.thumb.jpg.3c9951493dca6b2e5ad8d31afa8f6b0c.thumb.jpg.579343ac7d082fb92bf9b9b19a4e03cf.jpg)
