Unread Classifieds since Last Visit
Showing adverts posted in for the last 14 days.
- Past hour
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
MSA hi cut helmet inspired setup, typically used by seal during the GWOT years Comes with upgraded inside padding counterweight pouch, fma ms2000 strobe with IR helmet mounted torch with IR Nvg mount and upgraded retention bands good texture on the external of the helmet , painted for that worn look100.00 GBP
- GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
Vertically brand new I bought this a couple months ago and only fielded it once completely stock, since then I’ve upgraded it slightly both internally and externally. Holy warrior EXPS3 S1 Evolution gear G43 (original mount included) unity riser and unity G43 mount Radion Raptor charging handle Angled foregrip PEQ with pressure pad and x300 light (added after pictures were taken) MOE stock PTS Pistol grip QD Suppressor 1x hk style mag 3x vmag v3 Unicorn Arms inner barrel with new hop rubber (never fielded) All brand new coming in at about £1,200 collection only from Gloucester as I want to insure a smooth handover I can drive to meet you mid way at an additional cost.900.00 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Make: TMC Model: Full face mesh mask Accessories: N/A Condition: Excellent Splits/Swaps/Part Exchange: No/no/no Price/Payment: £10 / PayPal fees and postage included10.00 GBP
London
- Today
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Used but good condition. Few marks and scratches on the outside from fitting but the gun was never fielded and was just a wall hanger. It has PTW gears and trigger installed, very smooth. Ambidextrous fire selectors. These haven't been available for a long time, I can also throw in an etiny PTW ECU for an additional £20. Price includes all fees and postage150.00 GBP
- GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
various upgrade parts for the AAP 1. Fuku-2 reaper kit (used but good) £75 2. CTM Fuku-2 grey lower frame (new) £7 3. TTI Scorpion CNC upper receiver (used but good) £75 4. Action Army AAP-01 mag grip (new) £5 5. CTM mag grip (used but good) £7 6. Action Army AAP-01 CNC charging ring (used but good) £3 7. Cowcow stainless steel hammer housing (new) £40 8. Red Fuku-2 compensator (new) £10 All prices include PayPal fees and postage200.00 GBP
Bedford - GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Very good condition with only a few small marks from fitting. Comes with fake forward assist. Can also provide an alpha parts dust cover if required. Price includes postage and all fees, payment via PayPal goods and services100.00 GBP
Bedford - GB
-
Time Left: 6 days and 18 hours
- FOR SALE
- NEW
Barrels and Compensators 1. (Black) BPW Steel Outer barrel and Aluminum Compensator Ramjet and Afterburner style for G19/G19X/G45 VFC SOLD 2. (FDE) Gunday Aluminum Outer barrel and Compensator Ramjet and Afterburner style for G19 Gen4 £40 Glocks - G19 Gen 4 Bomber CNC Aluminum Slide SOCOM MK27 MOD 0 Comes with CNC Aluminum slide, steel suppressor height sights, MOS plate for RMR, Magazine gap filler to use G17 magazines, 130% pro arms nozzle return spring, crusader steel hammer set, Unicorn bucking, TTI lightweight 26rds magazine. Price £250 - without magazine £220 The upper is compatible with G19 Gen4, G19 Gen 5, G19X and G45 lowers. - G47/17 Gen5 Bomber CNC Aluminum Reptile XP (NOS style) slide Comes with Bomber CNC Aluminum slide and outer barrel as title, Suppressor height steel sights, TTI Bomber Magwell, Pro Arms Killer Style FDE Aluminum Trigger, CowCow Steel G17 Recoil Rod, Crusader Steel Hop Up chamber, 4UAD Bucking, Unicorn barrel, 130% pro arms nozzle return spring, Umarex G17 frame, Gunday Aluminum Magazine Base FDE TTI style, Guns modify outer barrel retainer, VFC Umarex Gen 5 magazine leak free, RMR plate and normal plate. The upper is compatible with G45 and G17 frames, mounted on G45 lower it becomes a G47. Price £400 - With matching color reflex rmr, Holy Warrior HD2, +£45 - With matching color Olight PL-Pro flashlight, +£70 All together £500 - G45 Pro Arms Killer Style CNC Slide CERAKOTED Grey version Comes with the above slide, Gold outer barrel, Black thread protector, CowCow steel hammer parts, Pro Arms 130% Steel recoil rod and spring, 130% Pro Arms nozzle return spring, Guns modify outer barrel retainer, Agency metal back/base, night sights, Unicorn barrel, 4UAD bucking, RMR plate, normal plate, Metal killer style magwell (not in photo) black. Magazine is a place holder only, it's just the shell with a bomber tti 2slots mag base - so magazine is not functional. Original G45 slide and outer barrel included. The upper/slide is compatible with G45, G19X, G19, G19 gen 4 lower frames. Price £310 Attachments available for all of the above - Olight PL-PRO 1500 lumen flashlight Desert Tan (FDE): £70 - Olight PL-3S 1200 lumen flashlight Desert Tan (more like bronze): £60 - Holy Warrior reflex rmr sight FDE £45 - Holy Warrior metal SRO black £45 Collection in London NW6, shipment available and buyer covers it. Open to trades, anything mcx/mpx, optics, or some other cool stuff.Ask for price
-
Time Left: 6 days and 18 hours
- FOR SALE
- USED
Make: Tokyo Marui Gun/Model: SCAR L Accessories: vortex crossfire red dot, Warhead brush less motor 27K, Gate Titan Basic, PTS MREX rail, 3 PTS ngrs mags, Titan Li-Ion battery Condition: Used but boxed. FPS: 330 (0.2g bbs) Price/Payment: £500 Inc Postage For Sale my TM Scar-L with extras. The Scar is in excellent condition. Eagle 6 Spring, EdGi Barrel and custom R-Hop installed. Metal stock latch/brass deflector. Gate Titan Basic. Warhead 27K brush less motor. Recently replaced reciprocating handle assembly as original had broke. Recently installed the Eagle6 MJF replacement part. Rewired to deans and moved the fuse. Deans connector can be removed to allow movement of the cables if removing the stock. Fires faultlessly with all mags very good range and accuracy. All mags work with the bolt release. Recoil is great again no faults. There are few scuffs on the side due to a sling rubbing but on slight cosmetic wear. This is by far my most accurate RIF. Happy to discuss changes to the package should people not want the optic or mags, battery. PTS short grip not included now.500.00 GBP
-
Time Left: 6 days and 11 hours
- FOR SALE
- USED
WTS FCW M870 Master key adaptor TM / GE M870, consists of mini gas tank RIS to RIS mounts. Never fitted £40 posted.40.00 GBP
glasgow - GB
- Yesterday
-
Time Left: 6 days and 10 hours
- FOR SALE
- USED
Fully functioning and leak free. £50 including postage.50.00 GBP
Wakefield - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Original KSC USP Compact, ABS (Japanese Version) Original replica that KSC/KWA initially produced before switching their replicas to the system 7 builds. Up as a boneyard as it doesn’t have a magazine so unable to test, can’t garuntee it’ll still be working or not, buy at your own risk. Not sure where it went but was obviously functioning fine last time I used it (a fair old while ago) can be posted!30.00 GBP
-
If you consider splitting would take the mags. Nw if not -
Time Left: 6 days and 6 hours
- FOR SALE
- USED
Ra tech scout scope mount and handguard for we m14 brand new, fitted once, no longer needed. £35 posted35.00 GBP
-
This advert is COMPLETED!
- FOR SALE
- NEW
Ra tech alloy full marking we m14 upper receiver, brand new never fitted. £45 posted45.00 GBP
- GB
-
Time Left: 6 days and 6 hours
- FOR SALE
- USED
Got this on an impulse buy off here earlier in the year for considerably more than I’m selling for, but I need the space so it’s gotta go. vgc overall, comes with 3 mags, bipod,co2 shell adaptor (co2 charger required) 2 packs of shells, 1 pack are low power and one are high power, i believe the high power ones leak, however i have a seal kit that will come with the rifle. £225 posted225.00 GBP
- GB
-
Has it got the threaded or non-threaded muzzle? -
Time Left: 6 days and 6 hours
- FOR SALE
- USED
2 left Make: Angry Gun Accessory: Heavy weight steel buffer and steel bolt end piece Condition: Light use Splits/Swaps/Part Exchange: N/N/N Price/Payment: £40 each for the buffer on its own, or £50 with the end piece. Pictures: Attached40.00 GBP
-
Time Left: 6 days and 4 hours
- FOR SALE
- USED
Integrated foregrip and flashlight Almost like new condition Features USB cable rechargable(charging cable included) 1450 high Lumen output(or 1000 to extend runtime) The light head is a solid plastic instead of glass=no need to worry about it being hit and break by bbs Also save you a foregrip Price includes postage cost60.00 GBP
- GB
-
Hi, would u consider selling the Buffer Stock Adapter & SOPMOD Stock separately? Cheers, Mike -
Time Left: 6 days and 3 hours
- FOR SALE
- USED
For sale, Novritsch SPP1 Hi Capa with RMR As standard, with CNC RMR Mount and working RMR sight. No front sight. Functions very well, no issues Comes with 2 leak free CO2 mags £100 posted100.00 GBP
-
Time Left: 6 days and 2 hours
- FOR SALE
- USED
Hao/ tm L119a2 Standard internally, bar a nub and rubber upgrade. Genuine ergo grip, Magpul stock , trigger guard and Magpul qd sling mount. Angry gun ambi charging handle. Airsoft Artisan 216 fh. Attached: Holy Warrior T2 on Genuine Aimpoint LRP mount Generic magnifier on twist off mount with Genuine Aimpoint Riser to align with T2. Generic Magpul style fore grip. Comes with: 6 gas tight GM pmags Steel r/s threaded spare barrel Barrel tool. Never skirmished. £1000 collected, between Bath and Bristol. Will have a couple goodies waiting for you also. (Worth £100 plus) Thanks for looking. Before anyone asks about posting; this build cost well over £2000 to get together. So I am not comfortable popping it in the post uninsured and taking a gamble on it arriving safely.1,000.00 GBP
Bath - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
For sale, GHK AKM v2 GBBR rifle. Reluctant sale to make space for other projects, this is a lovely full steel and wood AKM. It’s battle worn externally, with BB strikes on the wood etc, but functions perfectly. Upgraded with the following: PDI 6.05 inner barrel PDI Hop rubber Bow master CNC Hop chamber and CNC chamber hop base CNC railed top cover RA-Tech NPAS Brand new V3 Pmag £300 posted or collection from Swindon300.00 GBP
-
This advert is COMPLETED!
- FOR SALE
- USED
Good condition only used a few times as I prefer chest rigs50.00 GBP
-
Time Left: 6 days and 41 minutes
- FOR SALE
- USED
MCX STOCK GONE Quake 8 blue: used / normal condition and working well (not sure how many primers and if they could work so go as a gift with Q8） 💷75+3 LCT rpk74 furniture: new / 💷40 all inc Pt-1 zenit type stock: new / still have 1 which missing receiver connector GONE AKS74U rail mount : GONE Plastic MOE AK grip: GONE LCT stock slim motor + plastic Pt3 grip: new / Need two grip strews 💷35 all in AR mags : used/ 3 nurpol(2 mid+1 high) 2 specna arms(1mid+1high) short one unknown brand (high) 💷25 +3 AR stocks new/ 💷 10+3 each Stock motors/ from cyma&TM&VFC&GE.... 💷Free go with any this ads furniture Happy for offer114.51 GBP
-
Time Left: 6 days and 25 minutes
- FOR SALE
- USED
All functional, comes with both adapters and hose (you may need new hose depending on length requirements)35.00 GBP
- US
.thumb.jpg.1e0030e10e3d6374f56acf0218f69743.jpg)
