URSvAir14 Posted December 16, 2011 Posted December 16, 2011 Me and a couple of friends are thinking of putting together our own airsoft sniper rifle. We hope it to be a spring powered rifle built with parts that we will make on our own. We have the equipment to do so. We want it to use a feed from a magazine but we have no idea on how to do this. We know how to make the magazine it's just making the internals of the gun putting the bbs into the barrel. Also, we have no idea of how to stop the bbs from falling out of the barrel when the gun is pointing down. We think that this will happen but we haven't tested it. If any of you have any ideas on how we could fix either of these things please tell us.
Cam-the-airsoft-sniper Posted December 16, 2011 Posted December 16, 2011 Me and a couple of friends are thinking of putting together our own airsoft sniper rifle. We hope it to be a spring powered rifle built with parts that we will make on our own. We have the equipment to do so. We want it to use a feed from a magazine but we have no idea on how to do this. We know how to make the magazine it's just making the internals of the gun putting the bbs into the barrel. Also, we have no idea of how to stop the bbs from falling out of the barrel when the gun is pointing down. We think that this will happen but we haven't tested it. If any of you have any ideas on how we could fix either of these things please tell us. Well first you will need a machine shop or a CNC machine. Also do you know how hard it will be. Well your first bet would be to start with a VSR base. Oh and the BB's wil not fall out if you have you hop set.
URSvAir14 Posted December 16, 2011 Author Posted December 16, 2011 Well first you will need a machine shop or a CNC machine. Also do you know how hard it will be. Well your first bet would be to start with a VSR base. Oh and the BB's wil not fall out if you have you hop set. Thanks. when you say we must have a hop up set you mean we should install one just above the magazine feed?
URSvAir14 Posted December 16, 2011 Author Posted December 16, 2011 Oh and please note, we want to make the furnishings and the body ourselves.
Cam-the-airsoft-sniper Posted December 16, 2011 Posted December 16, 2011 Yes, The BB's will feed directly into the hop-up as per every airsoft gun You may want to look into the Marushin Duel hop or the R-hop.
bigshep Posted December 16, 2011 Posted December 16, 2011 First point: You would be manufacturing a RIF, which is illegal, unless you have a valid defence and subject to a hefty fine and prison sentence if convicted (see VCRA sub forum) 2nd point: I understand your wish to make something from scratch, however you may be better off buying a doner gun and using the parts, internals from that and constructing your external design from there.
Supporters M_P Posted December 16, 2011 Supporters Posted December 16, 2011 As said really, if i were you, get a tokyo marui vsr 10, learn the gun inside out, use it and get to know it. it should help a lot
Hibernator Posted December 17, 2011 Posted December 17, 2011 To be honest, if you're unaware of what the hop is and it's primary functions in the gun then you're going to struggle! There's one in every airsoft gun on the market in one form or other. I dread to think what other issues you'll come across not knowing the basics.
Nickona Posted December 17, 2011 Posted December 17, 2011 well good luck to you, as for the furniture kits on it, I would suggest wood as its far easier to shape then plastic unless you happen to have pplastic molding equipment near by, my advice would be to buy the parts and build it up from there and make the odd bit as airsoft parts especially on sniper rifles are so perfectly engeneered it would be hard to remake them
Recommended Posts
Archived
This topic is now archived and is closed to further replies.