RobHedley Posted October 29, 2022 Posted October 29, 2022 Well… the initial excitement of getting the PSG-1 has wobbled a bit. I finally had some time and the wind had died down enough for me to zero in the Scope ready for next weekend. Gassed up the Magazines and started to adjust the hop. The first Mag I used was the one that came with the PSG-1 and all went well and I got the dead man man’s click when it was out of BBs. Switched to the second mag and all I got was dead man’s click. Pulled the magazine back out, added some gas (just in case) and it was full off BBs. Tried again but still dead man’s click. I then switched back to the original mag, reloaded the BBs but now have the same with that one. Just a click. I then put the mag into dry fire mode (I think I did it right) and it worked fine, sending BBs down towards the target but then it just continues to dry fire when empty. I clicked it back into normal mode and still the same dead man’s click. The one thing I did do was try to put the mag in without cocking the weapon back so hopefully that hasn’t broken something. I am not sure about setting dry fire mode on the mags and the Umarex website is down at the moment so double checking with the manual is a no go. Just for the record, the mags in the PSG-1 are the same as the Umarex G3 so anyone with experience of those as well would be appreciated. any ideas anyone?
Nick G Posted October 29, 2022 Posted October 29, 2022 My WE G3 does that occasionally, what seems to happen is that the valve knocker hasn't popped back into the firing position . Try cocking the bolt back then slap the mag in and give it a good thump before releasing the bolt.
RobHedley Posted October 29, 2022 Author Posted October 29, 2022 Cheers Nick, I will try that tomorrow as it has been put back in its case in disgrace!!! Nick G and Enid_Puceflange 2
SheriffHD Posted October 31, 2022 Posted October 31, 2022 Might be worth giving it fresh lube and working it into the moving parts to see if that helps. Enid_Puceflange 1
RobHedley Posted November 10, 2022 Author Posted November 10, 2022 Thanks for the advice gents. That was exactly it. A little dab of LT2 grease on the empty mag lever at the back of the magazine and it is working perfectly. They must have got a little dry in storage. I did the same on the spare mags just in case. Nick G 1
EvilMonkee Posted November 17, 2022 Posted November 17, 2022 Will bear this in mind for my new G3 I just bought today RobHedley and Nick G 1 1
EvilMonkee Posted November 18, 2022 Posted November 18, 2022 On 10/11/2022 at 15:25, RobHedley said: Thanks for the advice gents. That was exactly it. A little dab of LT2 grease on the empty mag lever at the back of the magazine and it is working perfectly. They must have got a little dry in storage. I did the same on the spare mags just in case. Ok, I now have exactly the same issue after it was firing fine!! What is wrong @RobHedley
Nick G Posted November 18, 2022 Posted November 18, 2022 Did you also lube the lever on the trigger box that lifts the valve knocker when the mag is empty ?
EvilMonkee Posted November 18, 2022 Posted November 18, 2022 Fixed it. Had to just rest the tab on the mag. Don't think it does it automatically Nick G 1
RobHedley Posted November 20, 2022 Author Posted November 20, 2022 @EvilMonkee I found that as well but put a spot of LT2 grease to help it on its way. Glad you got it sorted. Is your G3 as loud as the PSG 1?
EvilMonkee Posted November 20, 2022 Posted November 20, 2022 @RobHedleyIts loud but nowhere near as loud as the VFC FAL. Skirmished that today, fuck me, the G3 is lovely but the FAL is streets ahead. RobHedley 1
Recommended Posts