Strongarm Airsoft (Kent)

[Jez_Armstrong]

Good sunny Sunday to everyone 

 

I've opened my workshop back up and I'm taking in repairs again 

 

I would like to add that I do have a full time job and that any work taken on will be done in the evenings because of this I would just like to keep my work to repairs of broken guns to get guns back to working order so people can play, taking on bigger projects like DMR conversions or high speed builds won't be my preference, not that I can't do them but I'm not able to range test at my current location 

 

I can work on the majority of AEG's I do mainly specialise in M4's, MP5's G3's or anything H&K but I've probably been inside 95% of airsoft guns 

 

I'm based in Tunbridge wells in Kent so drop off for Kent players is fine, guns can be posted to me but customers must cover the cost of delivering each way 

 

I have most spares in my workshop to get a gun back to life but if you wish to supply new parts just make sure they are compatible 

 

My prices are very reasonable as this isn't my main income it's something to keep me busy and to make use of my workshop again so I charge £35 for a full aeg service which includes a full strip down and clean and re-grease, reshim and checking all components for wear, cleaning barrels, re-wiring if necessary 

 

Feel free to message me here or drop me a message on my Facebook page (although sometimes I don't always get the notifications ?) 

 

[email protected] 

 

Or 

 

Facebook.com/strongarmairsoft

[Jez_Armstrong]

Bump! 

[Jez_Armstrong]

Back open ?

 

[Dogsbody100]

Hi Jez,

 

Very interesting and super reasonable rates, I’ve been looking at upgrading the cm16 raider L that I’ve been playing with which is still in a stock condition.

 

Whilst I’m all for having a go myself I can just forsee a rif in pieces on the kitchen table with a very unhappy mrs glaring at me so would there be any chance of a quote to 

 

re shim and re grease the gearbox

 

fit a decent barrel

 

fit a decent hop

 

fit a decent bucking 

 

And anything else that’s recommended please mate? 
 

Many thanks in advance 

[Jez_Armstrong]

If you supply those parts I can fit them all ?

8 minutes ago, Dogsbody100 said:

Hi Jez,

 

Very interesting and super reasonable rates, I’ve been looking at upgrading the cm16 raider L that I’ve been playing with which is still in a stock condition.

 

Whilst I’m all for having a go myself I can just forsee a rif in pieces on the kitchen table with a very unhappy mrs glaring at me so would there be any chance of a quote to 

 

re shim and re grease the gearbox

 

fit a decent barrel

 

fit a decent hop

 

fit a decent bucking 

 

And anything else that’s recommended please mate? 
 

Many thanks in advance 

 

[Dogsbody100]

Hi,

 

Sorry for the delay I’d actually forgotten about this thread altogether which is something I often do ?

 

I’ll revisit this in the new year and go from there.

 

Many thanks! 

[tyrael]

Hi Jez, I'm very local to Tunbridge Wells and just got my first airsoft gun. It's a Tokyo MWS GBB

It came with a different trigger and hop up - how much would you charge to install something like this?