Impulse Posted October 11, 2020 Share Posted October 11, 2020 Hey all, I was wondering if anyone else has the same issues as me. It just so happens that in both my VSR and my MK23, the BBs hit the end of the suppressor as they exit. While I have no explanation for the VSR because barrel spacers are a thing, it seems that in the MK23 it's horrendously loose when installed into the pistol. Comparing it to the stock barrel, the Crazy Jet wobbles maybe half a millimetre either way, while the stock TM one sits nice and firm and aligned. Has anyone else had similar problems? Or do I have a pair of smol Crazy Jets Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted October 11, 2020 Supporters Share Posted October 11, 2020 Sounds like the classically loose definition of the term "concentric" as it applies to airsoft manufacturing operations..... Link to comment Share on other sites More sharing options...
MadMole Posted October 13, 2020 Share Posted October 13, 2020 Put an o ring around it near the end or a wrap of tape till it centers in the outer unusual as crazy jets are slightly wider at the end than most barrels so you often have to widen the pouter barrel for them to fit If its the same suppressor in both cases, could its threads be off and it doesnt sit straight Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.