Leeeeee Posted September 15, 2020 Share Posted September 15, 2020 Hi I’m new to Airsoft and this forum, I could use some help please! i want to spray the alloy top of my CYMA CM 126 pistol, it will still be two tone but really don’t like the blue!! can anyone advise how I take the auto/single shot switch out, it would make for a much better paint job thanks Leeeeee Link to comment Share on other sites More sharing options...
Shamal Posted September 15, 2020 Share Posted September 15, 2020 Hello Leeeeee welcome. Was gonna say Hi Leeeeee but sounded bit wrong. I mean, highly what???? Cant help with your question🤔 but somebody here will know👍 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted September 16, 2020 Supporters Share Posted September 16, 2020 I wouldn't bet on it, AEPs aren't particularly popular. And, er, sorry, don't know. I've got a CM.123 with the selector on the frame, and wouldn't like to guess how the 126 has it fixed in the slide. What I will bet is that it'll come apart, as there's nothing on the 123 or 127/030 that's permanently attached: everything is screw out, push or, or wiggle out. Link to comment Share on other sites More sharing options...
Leeeeee Posted September 16, 2020 Author Share Posted September 16, 2020 Thanks Rogerborg, I’ll give it a push and a wiggle! Link to comment Share on other sites More sharing options...
Clanktank Posted September 18, 2020 Share Posted September 18, 2020 You should have got a parts diagram with the pistol that should give you some idea. To me it looks like a simple philips screw inside, take out the silver arm, and it should come off. Looks like a spring and ball-bearing in there as well, so just be careful they don't ping-fuckit into oblivion. Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted September 18, 2020 Supporters Share Posted September 18, 2020 29 minutes ago, Clanktank said: Looks like a spring and ball-bearing in there as well, so just be careful they don't ping-fuckit into oblivion. Magnets, magnets, magnets. Link to comment Share on other sites More sharing options...
JSwan Posted September 22, 2020 Share Posted September 22, 2020 From memory (I had one years ago) turn the slide upside down and there should be a small grub screw which holds the silver arm in place, once the grub screw comes out carefully slide the arm out as there’s a small spring and piece which holds the selector in place, then repeat in reverse on the way back! Hope that helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.