DarkAssassin Posted January 6, 2020 Share Posted January 6, 2020 Have had my AA12 since they came out, used it countless times. Recently I got a new battery for it 1600mah 8.4v as prescribed by TM, the last time I used the gun it would shoot once and just lock up, with a blinking red light under the stock cover. I have brought two different batteries since both the same spec but different brands. One of the two fired about 15 shots before it locked up and started blinking the red LED. Has anyone had any issues like this? Low battery, crap battery???? Link to comment Share on other sites More sharing options...
Moderators Tackle Posted January 6, 2020 Moderators Share Posted January 6, 2020 https://www.airsoftworld.net/tokyo-marui-aa-12-automatic-electric-shotgun.html Read the text in red at the bottom, lists a number of things that could "trip" the AA12, including voltage drop ? Link to comment Share on other sites More sharing options...
Guest Posted January 6, 2020 Share Posted January 6, 2020 Fingers crossed the electronics aren’t FUBAR. Took me months to find a replacement for mine Link to comment Share on other sites More sharing options...
DarkAssassin Posted January 6, 2020 Author Share Posted January 6, 2020 25 minutes ago, Tackle said: Snip Wow thanks I knew about not getting battery higher than 8.4v wow I didn't know about absolutely not dry firing it under any circumstances!!! Sometimes that's easier said than done when the gun needs to wind its mag up manually! Also have been using .28's in there for as long as I can remember... oops! 7 minutes ago, rocketdogbert said: Snip Oh yes I hope so too, although I have been looking for a good reason to get an SGR 12... Link to comment Share on other sites More sharing options...
GeorgePlaysAirsoft Posted January 6, 2020 Share Posted January 6, 2020 This isn't super helpful but mosfet light can also start when there is a problem within the gearbox. I had this occur and first assumed it was the mosfet, but apparently a screw got loose and damaged the piston. As it happens the same aa12 has just incurred another malfunction - jamming bbs leading to a lock up - i reckon if i was to connect battery and pull the trigger.. however many times id get the red light to flash. I had my aa12 repaired by Eagle6 after the tech i approached suggested them. Dlcustoms has also worked on aa12s but thats the only ones i know about. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.