Ricardinho Posted September 16, 2019 Posted September 16, 2019 Hello i got today my raider 2.0 and the cable of the battery is all outside , is it normal or is faulty?
Guest DrAlexanderTobacco Posted September 16, 2019 Posted September 16, 2019 Is there no way for you to push the cable back into the stock? You should be able to connect a battery, push the battery and cable into the stock, and then close it. Does the stock have a back plate/butt pad?
Mostly Retired Moderators L3wisD Posted September 16, 2019 Mostly Retired Moderators Posted September 16, 2019 Yeah, you should be able to (carefully) smush that thing into the stock tube slightly. Then presumably you aren't going to play too often with the stock all the way in, and your battery is in the sides of the stock so it'll be hidden once you retract your stock.
Guest DrAlexanderTobacco Posted September 16, 2019 Posted September 16, 2019 That's a good point - I forgot how the retractable stocks can be an issue if closed fully. Try extending the stock fully before closing everything up, then retracting it slowly until you reach a limit.
Ricardinho Posted September 16, 2019 Author Posted September 16, 2019 @DrAlexanderTobacco yes it got @DrAlexanderTobacco even the fuse is in the outside I’m quite concerned pushing because of damage of the cableage
EDcase Posted September 16, 2019 Posted September 16, 2019 I've got the CYMA M4 CQB (very similar to the G&G) The wires are stiff but don't worry about bending them. (Just don't pinch the bend to make it a sharp fold) Push the stock into its compact setting (as in photo) and push it all in while trying to twist them into a rough coil.
Ricardinho Posted September 16, 2019 Author Posted September 16, 2019 @EDcase thanks for you help , I will try
Ricardinho Posted September 17, 2019 Author Posted September 17, 2019 @DrAlexanderTobacco@L3wisD looks like ok, it shows 322fps that looks ok for you guys ?@EDcase
Guest DrAlexanderTobacco Posted September 17, 2019 Posted September 17, 2019 322fps with .2s is respectable
Ricardinho Posted September 17, 2019 Author Posted September 17, 2019 @DrAlexanderTobacco what you mean .2s? I’m quite new in this terms ?
Ricardinho Posted September 17, 2019 Author Posted September 17, 2019 Which battery do you recommend? Any online shops?
EDcase Posted September 17, 2019 Posted September 17, 2019 0.2g BB weight is what the fps is usually measured with. Batteries/chargers can be found at Hobbyking.com and vapextech.co.uk Li-Po 7.4v with highest mAh rating that can fit in the gun. (1300mAh will last a whole day if not going full auto all the time) Don't worry about the other numbers Spend at least £30 on a charger to keep batteries in good condition and reduce the risk of fire
Ricardinho Posted September 17, 2019 Author Posted September 17, 2019 Cheers @EDcase really appreciated for your help mate
EDcase Posted September 17, 2019 Posted September 17, 2019 You're welcome ? Try searching the forum for more info too
Ricardinho Posted September 18, 2019 Author Posted September 18, 2019 Guys one more thing , good online shops to buy some equipment and accessories?
Andy1966uk Posted October 15, 2019 Posted October 15, 2019 I have a raider 2 also. Good starter rifle for CQB. I use a 9.6V 1600mAh Ni-MH Crane Stock Battery, also used a 7.4V Lipo. Try Patrolbase, they have great customer service, but there are many others...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.