DabbinBarney Posted June 9, 2019 Share Posted June 9, 2019 I'm thinking of buying an SW-02A because I've always wanted a Barret 50 cal and this one is very reasonably priced for a full metal replica. Only problem is that after some research I've found out this gun also has abysmal accuracy, so does anyone have any ideas for how i can increase its accuracy on a budget? Link to comment Share on other sites More sharing options...
AK47frizzle Posted June 9, 2019 Share Posted June 9, 2019 It's just a standard m4 in a large shell. So all upgrades on those platforms will transfer to this one. Link to comment Share on other sites More sharing options...
Supporters Samurai Posted June 9, 2019 Supporters Share Posted June 9, 2019 Unless you don't plan to move with it, you probably shouldn't buy one. A teammate of mine got one and then got rid of it after one game and he is a very big, muscular bloke. Link to comment Share on other sites More sharing options...
IntelligentCelestialBeing Posted June 12, 2019 Share Posted June 12, 2019 On 09/06/2019 at 12:17, DabbinBarney said: I'm thinking of buying an SW-02A because I've always wanted a Barret 50 cal and this one is very reasonably priced for a full metal replica. Only problem is that after some research I've found out this gun also has abysmal accuracy, so does anyone have any ideas for how i can increase its accuracy on a budget? Good accuracy upgrades i know about is S-hop and flat hop S-hop is using sugru to patch up the hop up window on the barrel and flat hopping a bucking is sanding off the nub on The bucking. This will improve range, accuracy and groupings. Another accuracy upgrade I heard about which is more complicated but still fairly simple although I’m not sure how effective it really is. You drill a hole into the outer barrel (not inner barrel!) few inches down from the tip of it. Tap a thread into it and screw a set screw in it, so the set screw is tightened through the outer barrel and touching the inner barrel. Supposedly this will prevent inner barrel movement and lower, vibrations which will improve accuracy. Like I said though not sure how effective it is. But the S-hop and flat hop has proven to be super effective also s-hop and flat hop is fairly cheap. It’s better with a dermal which can be quite pricey unless you get a cheap one but sand paper will also work but longer and harder. All you need need for s-hop is sugru, 6mm Teflon tubing and that’s it! For flat hop you’ll need: dremal or sand paper, a bucking and that’s it! Unless you want a new hop up system prowin is good they are about £20-22 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.