Asomodai Posted May 22, 2019 Author Posted May 22, 2019 Had to get the Dremel out to enlarge the bolt holes for this G36 side rail as well as the area above to take the screw heads. The original bolt pattern was too wide. Without going real steel hand guard there is no other way to attach side rails to the G36E without modifying the hand guard or body itself. Good enough for a torch!
Philby21 Posted May 22, 2019 Posted May 22, 2019 A dab of black paint and no-one will know the difference, really neat work!
Asomodai Posted July 6, 2019 Author Posted July 6, 2019 MG36 project has now been completed with the addition of the C-Mag auto winding magazine. Had to take it apart twice already to look at how it works and how to unjam if needed. Hopefully will be using this on the field soon!
Philby21 Posted July 7, 2019 Posted July 7, 2019 Did you manage to find a sound operated C mag in the end?
Asomodai Posted July 7, 2019 Author Posted July 7, 2019 Just now, Philby21 said: Did you manage to find a sound operated C mag in the end? Yes I did. Grabbed an A&K one from Italy. Battery was DOA but had some spare ones with the right connector.
Philby21 Posted July 7, 2019 Posted July 7, 2019 You're certainly putting a lot of business the way of the Italians - was it an offer you couldn't refuse?? ? (sorry)
Supporters Druid799 Posted July 7, 2019 Supporters Posted July 7, 2019 23 hours ago, Asomodai said: MG36 project has now been completed with the addition of the C-Mag auto winding magazine. Had to take it apart twice already to look at how it works and how to unjam if needed. Hopefully will be using this on the field soon! There’s something business like about an uncluttered assault rifle (no bells/whistles or any other frippery bolted on to it) , M16A2 , L1A1 , AK 47 and your G36 that just says “You got a job to be done ? No problem !” ?
Asomodai Posted July 7, 2019 Author Posted July 7, 2019 4 minutes ago, Druid799 said: There’s something business like about an uncluttered assault rifle (no bells/whistles or any other frippery bolted on to it) , M16A2 , L1A1 , AK 47 and your G36 that just says “You got a job to be done ? No problem !” ? Absolutely! Though there is something to be said to get the laser and llm03 module for the two rails. ? I wouldn't mind a RDS considering how bad the eye relief is on the scope. It's a BB hose first and foremost. Screw it. I also want the AG36 nade launcher!
Supporters Druid799 Posted July 7, 2019 Supporters Posted July 7, 2019 BUT the LLMO3 is the correct light to mount on it so almost say it’s not covered by the ‘keep it clean’ caveat ? ?
Asomodai Posted July 7, 2019 Author Posted July 7, 2019 It's pretty heavy enough as it is! If it's not enough of a BB hose I can get some 40 Mike's ?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.