Jump to content

Archived

This topic is now archived and is closed to further replies.

Cam-the-airsoft-sniper

Full stock M4 Help.

Recommended Posts

Hi,

 

I am going to buy a Full stock for my G&G M4. Will it fit and/or how do I do it?

 

It is a D-Boys full stock.

 

Thanks!

 

Cam.

Share this post


Link to post
Share on other sites

should fit ok, have you got cranes on it now? if so just remove and fit solid in place only 1 screw

Share this post


Link to post
Share on other sites
should fit ok, have you got cranes on it now? if so just remove and fit solid in place only 1 screw

It has a 'sliding stock'. Were does the screw go? I cant find anythind on it!

Share this post


Link to post
Share on other sites

the tab you would push at the back to make it move, pull that all the way and the stock slides off

then there is a screw at the back of the stock tube on the bottom, remove that and then the tube end plate will be free to get pulled off

 

look down the newly opened shaft and there is a screw at the bottom, undo that and the thing comes off.

 

carefull not to over tighten that screw when it goes back on, It connects to the back of the gearbox and if you strip the threads of the spring guide (the bit it screws into) you need a new one to get the stock back on.

Share this post


Link to post
Share on other sites
the tab you would push at the back to make it move, pull that all the way and the stock slides off

then there is a screw at the back of the stock tube on the bottom, remove that and then the tube end plate will be free to get pulled off

 

look down the newly opened shaft and there is a screw at the bottom, undo that and the thing comes off.

 

carefull not to over tighten that screw when it goes back on, It connects to the back of the gearbox and if you strip the threads of the spring guide (the bit it screws into) you need a new one to get the stock back on.

Thanks. I want to getthis ine > http://www.novatcombat.com/product_detail.php?id=67

 

Does this come and fit with my G&G Blockback? If not can you find me another one please!

Share this post


Link to post
Share on other sites

It should fit but as the website says it might need a little filing to get it to fit properly.

Share this post


Link to post
Share on other sites
It should fit but as the website says it might need a little filing to get it to fit properly.

Thanks, just wanted to know.

Share this post


Link to post
Share on other sites

×