lukeB Posted February 6, 2019 Share Posted February 6, 2019 I know, another mp5 post😀 Picked up a used metal CA Mp5sd as a project gun. I think its a pro line (b&t with the slide hop adjustment)  Was planning on dropping in a titan, because every mp5 deserves to have 3 round burst.  What has confused me is the way its wired, I was expecting it to be front wired. Its actually a rear wired gearbox, with an extra cable linking it to the front.  It looks like running a cable directly from the gearbox into the front handguard, would require me to take the entire receiver apart every time I wanted to access the gearbox. Which is probably why they had that connecting cable in the first place.  Whats the best way to wire this up given that I'm getting a new titan gate?     Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 7, 2019 Supporters Share Posted February 7, 2019 Get the rear wired Gate and keep a connector cable in there, change it to a better connector though - a decent Deans or an XT60 should fit in there. Link to comment Share on other sites More sharing options...
Supporters Prisce Posted February 7, 2019 Supporters Share Posted February 7, 2019 3 hours ago, Lozart said: Get the rear wired Gate and keep a connector cable in there, change it to a better connector though - a decent Deans or an XT60 should fit in there. +1  The gate Titan removes all of the internal wiring of the gearbox (if you didn’t already know), it’s also wired to deans as standard(mine was).   Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.