Willyg1981 Posted January 30, 2019 Share Posted January 30, 2019 Hi everyone, I’m in the process of doing a few mods to my Cyma m4 and one of the things I’m doing is replacing the stock piston and wondering if it’ll be ok to use guarder Teflon gear grease ,...Iv got some abbey silicon oil but I’m pretty sure that’s it’s too thin ,... any pointers would be helpful 👍 Link to comment Share on other sites More sharing options...
adox Posted January 31, 2019 Share Posted January 31, 2019 The Guarder Teflon gear grease should be fine to use. However, my favourite grade to use in the gear box is Abbey Gun Grease LT2.👍👍 Link to comment Share on other sites More sharing options...
clumpyedge Posted January 31, 2019 Share Posted January 31, 2019 9 hours ago, Willyg1981 said: Hi everyone, I’m in the process of doing a few mods to my Cyma m4 and one of the things I’m doing is replacing the stock piston and wondering if it’ll be ok to use guarder Teflon gear grease ,...Iv got some abbey silicon oil but I’m pretty sure that’s it’s too thin ,... any pointers would be helpful 👍 Personally I use this and never gone wrong with it but only use very small amounts as it goes a long way LINK Link to comment Share on other sites More sharing options...
koppel Posted January 31, 2019 Share Posted January 31, 2019 Castrol LM bearing grease here, with no issues. Never seen the need for hyper expensive repackaged greases. Only proviso is polycarbonate pistons will degrade with certain petroleum products, but 90% of pistons are NOT polycarbonate, as it's not a great material anyway. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.