sarni307 Posted April 28, 2011 Share Posted April 28, 2011 Anyone here play there or have played there? I need to know what spring you used I have a g36c and by the time I go it will have a tight bore and blue madbull hop rubbers (reason I stated this is because I was told the new rubbers would increase the fps by about 5 because they are softer than the standard ones. I was gona get a 1j spring but I'm not so sure now as I don't want to be over. But I also don't want to sell myself short with a m90 either any advice would be appreciated. Link to comment Share on other sites More sharing options...
Mitchell Gee Posted April 28, 2011 Share Posted April 28, 2011 im going to go there, but im not old enough yet, as for springs, i wouldnt know, ask them on there facebook page if you have facebook or email them Link to comment Share on other sites More sharing options...
sarni307 Posted April 28, 2011 Author Share Posted April 28, 2011 I might do that email them that is facebook is que*r as Fu*k. (do have one by the way) lol I figured some people on here must of played there it's a popular site. Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 28, 2011 Supporters Share Posted April 28, 2011 Everyone I know that has it does play there rates it very highly. I think the FPS is a very strict 328 Link to comment Share on other sites More sharing options...
sarni307 Posted April 28, 2011 Author Share Posted April 28, 2011 Hense the spring question Link to comment Share on other sites More sharing options...
airsofterboy Posted April 28, 2011 Share Posted April 28, 2011 I have been there Many times . Best site I have been to by far! Link to comment Share on other sites More sharing options...
brewer17 Posted April 28, 2011 Share Posted April 28, 2011 I play there! Right, the FPS limit is 328 with a 4-5% variance, so the absolute MAX is 340. I put a M95 spring in my G&P Sentry and a tightbore. The Mall's chrono said it was doing 370FPS. I know that is rubbish because my chorno says 335, my local site says 335 and my mates chrono says 335. My advise is DONT do your upgrades yet. Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 28, 2011 Supporters Share Posted April 28, 2011 I would.stick an m90 in it, you can always change it back at a later date needed Link to comment Share on other sites More sharing options...
kejot Posted April 28, 2011 Share Posted April 28, 2011 ive played there, strict limits, but wouldnt worry about upgrades till after visit if you cant chrono before Link to comment Share on other sites More sharing options...
sarni307 Posted April 28, 2011 Author Share Posted April 28, 2011 The problem is we ain't going for a couple of months so want the upgardes for my normal games Link to comment Share on other sites More sharing options...
Mitchell Gee Posted April 29, 2011 Share Posted April 29, 2011 what gun do you use? it may have a quick change gearbox... my next gun im saving up for has that Link to comment Share on other sites More sharing options...
sarni307 Posted April 29, 2011 Author Share Posted April 29, 2011 It dosent wish it did mind. Link to comment Share on other sites More sharing options...
Tristan Orr Posted April 29, 2011 Share Posted April 29, 2011 Is this the mall at reading (as there is one in scotland)? I want to play the one in reading. I have a Magpul Masada ACR, and its been chrono at 328-338 so your never going to get a gun to shot dead on a FPS all the time. With the upgrades, the main thing that the blue Madbull hop rubber will do for you in increase your range by about 15ft, the tightbore will make it accurate and increase FPS by about 5FPS. I hope your getting a Prometheus 6.03 EG Barrel (steel inner barrel), as these are the best barrels for AEG's and snipers, I know people are going to say that 6.01 is better but believe me its not due to the air compression in the barrel. Your best of getting the upgrades and then chrono your gun and see what you get, then look at down grading the spring if need either that or you can cut the spring down take 1 coil off at a time until you get what you want! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.