Hamolicious Posted March 3, 2018 Share Posted March 3, 2018 So I was upgrading my gearbox and i accidentally broke my tappet plate and I was thinking of getting a metal one but don't know if there's an effect of getting a heavier tappet plate. Link to comment Share on other sites More sharing options...
ak2m4 Posted March 3, 2018 Share Posted March 3, 2018 Metal tappet plate... Never come across a metal one before, are you sure you mean tappet plate? Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted March 3, 2018 Supporters Share Posted March 3, 2018 Seen metal selector plate on a D-Boys PDW v2 box & think I've seen a metal selector on a micro switch v2 box But tappet plate ??? more weight - slower return/chamber more hammering at gearbox front (increase of cracking) Selector plates do break but tappet plates normally just wear at fin Only broke one M4 selector refitting back in receiver and heard/told selector on G36's are easy to break too if not careful If you have a Cyma v2 box they have a clear tappet plate which is quite hard/brittle (Cyma v3's have a white more flexible tappet) Guess these clear cyma v2 tappets can break if you are not careful (or if you tread on one) They have a cut out up or taper up front, due to internal strengthening - so a tiny mod req (nothing major) But think you have to go some to bust a tappet unless really unlucky me thinks Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted March 3, 2018 Supporters Share Posted March 3, 2018 I made a metal one. It was shite. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted March 4, 2018 Supporters Share Posted March 4, 2018 14 hours ago, ImTriggerHappy said: I made a metal one. It was shite. Ahhhh but I'll bet it was a very accurate, precise but shite tappet plate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.