Jump to content

DMR Bucking?


stig
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

Having upgraded my TM G3SG1 with a Guarder M120 kit, it's now firing at about 420fps on .20s.

 

But hop is all over the place! Some way high, some dropping, some about right? The gun is pretty old and I expect it's on the original hoo bucking.

 

Any recommendations as to a replacement for this sort of power? 50 degree Guarder hops are rated for M120, but that's at the limit for their softness.

 

Don't really want to R/Flat hop, so a Maple leaf perhaps?

 

Any advice/recommends for this sort of setup appreciated thanks.

  • Supporters
Posted

Blue or red Madbull, purple prometheus.

The transparent guarder is bad. It is accurate but tears very easily and many of them have too big O ring part and the BB falls through it.

Posted

Thanks Samurai - almost ordered a clear Guarder earlier, glad I didn't!

 

Any opinion on ASG Ultimate? I prefer (the idea of) buckings that come with a ring seal, rather than flossing, and these do. Or maybe the Madbull/Prometheus do too?

Posted

Prommy purple, you can't go wrong..

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...