Fat-jd Posted October 1, 2017 Posted October 1, 2017 Been banging my head on this subject since yesterday can some just give me a straight yes or no answer please can I run a lipo 7.4v 2s battery in a standard a+k m249 saw with no mosfet or will it toast the gear box here's a pic of the gun I don't want to wreck
Supporters Prisce Posted October 1, 2017 Supporters Posted October 1, 2017 Yes. I run a standard 7.4V lipo in my M60 with no trouble. You only need the MOSFET for 11.1v lipos.
Supporters Lozart Posted October 1, 2017 Supporters Posted October 1, 2017 It'll be fine. You'll need to replace the trigger microswitch at some point regardless because the one they fit is a pile of wank. Replacement is about £3 from Maplins!
Fat-jd Posted October 2, 2017 Author Posted October 2, 2017 On 01/10/2017 at 8:23 PM, Prisce said: Yes. I run a standard 7.4V lipo in my M60 with no trouble. You only need the MOSFET for 11.1v lipos. What c rate / mah are you using how long dose it last roughly
Supporters Prisce Posted October 3, 2017 Supporters Posted October 3, 2017 I use the little PEQ box 1200mah 30c nuprol battery(it came with the gun when purchased second hand). It lasts half the day, so we have 3, 1 as back up.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.