ollieconnell Posted March 13, 2011 Posted March 13, 2011 My CA M15A1 is Not Working... The only thing i can see is wrong is the bolt under the pistol grip leading to the motor is missing, could this be the problem?
Supporters Rock-climby-Dave Posted March 13, 2011 Supporters Posted March 13, 2011 does it sound like the motor is spinning freely or grinding a lot?
ollieconnell Posted March 13, 2011 Author Posted March 13, 2011 does it sound like the motor is spinning freely or grinding a lot? it dosen't shoot at all but it makes a clunk that i know from experience that the gun is working but somthing is stopping it
JerseyRider Posted March 13, 2011 Posted March 13, 2011 Yer sounds like the motor isnt meshed with the gears properly taye the pistol grip cap off and see if the is a spacer inside Its ethier in the cap or attached to the back of the motor
AF-UK Founding Member Deva Posted March 13, 2011 AF-UK Founding Member Posted March 13, 2011 Either way you're going to want that bolt back.
AF-UK Founding Member Deva Posted March 13, 2011 AF-UK Founding Member Posted March 13, 2011 So you need to get the bolt back in to raise the motor back up to it's correct position.
ollieconnell Posted March 13, 2011 Author Posted March 13, 2011 So you need to get the bolt back in to raise the motor back up to it's correct position. can i buy one somewhere?
AF-UK Founding Member Deva Posted March 13, 2011 AF-UK Founding Member Posted March 13, 2011 I'm afraid I don't know the length/thread type of what you need. Hopefully someone else might.
gooodvibes Posted March 18, 2011 Posted March 18, 2011 just buy a whole new base plate or an entire pistol grip set that normally comes with its own base plate. trying to find just the bolt will be ###### near impossible.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.