ofteninneedofhelp Posted February 14, 2017 Posted February 14, 2017 Hi everyone, sorry to ask a question with a probably very simple answer!! There is a tiny pin located just in front of the fire selector switch and it seems to be holding the gearbox in place. The pin is not easy to bang out and I'm slightly worried to hit it too hard in case I damage something. Does anyone know how to remove this pin or is something else keeping the gearbox from moving? Thanks for any replies!! Update: I managed to bang the pin out most if the way but it stuck and i was still unable to get the gearbox out. Any advice??
Supporters Samurai Posted February 14, 2017 Supporters Posted February 14, 2017 Take it all the way out. One side has ridges on it, it must go out that way. The other side is smooth, so if it is smooth you see, bang it back and push it out the other way.
ofteninneedofhelp Posted February 14, 2017 Author Posted February 14, 2017 Great!! Thanks for the help mate!!
dazzer306 Posted February 14, 2017 Posted February 14, 2017 Also when you put it back in, put the smooth side in first, this make it a lot easier, also if you have trouble removing it one side flip it over and try from other side
Albiscuit Posted February 27, 2017 Posted February 27, 2017 The online guide I used last night did not show me this pin!! Took me ages to work out why the gearbox was not coming out GRRR
Recommended Posts
Archived
This topic is now archived and is closed to further replies.