silver145 Posted September 11, 2016 Posted September 11, 2016 HI all,Purchased a CM.701b as a base to upgrade the hell out of.So far looking atAA hop up chamber PDI New Trigger2+Piston-end / VSR-10PDI Precision Palsonite Cylinder Set VCPDI VSR 450 spring(need barrel+spacer recommendations)What else am i missing/What would you change.Also is there any problems with the items i have chosen. I believe the spring is the 13mm fat diameter one as the cylinder set says that is what is compatible. Also if you believe that i should change any of the above for cheaper alternatives that provide the same performance please say so Last question - do i order the regular or the Bore-UP items? (No idea what Bup is btw)Thanks
CaptainDumbass Posted September 11, 2016 Posted September 11, 2016 i believe a Prometheus barrel would be best!
CaptainDumbass Posted September 11, 2016 Posted September 11, 2016 Have fun with spending hundreds on new hop units/rubbers/nubs/etc until you find the right ones! welcome to sniping >
silver145 Posted September 11, 2016 Author Posted September 11, 2016 Have fun with spending hundreds on new hop units/rubbers/nubs/etc until you find the right ones! welcome to sniping > Tell me about it, going bald from playing with the AEG on this side of things! still playing haha. Also what size would you recommend? 6.01 etc (any compatibility problems with the parts i have listed?)
Supporters sp00n Posted September 11, 2016 Supporters Posted September 11, 2016 Have a look on airsoft pro (or aspuk, it's the same stuff) for a 90 degree trigger, cylinder, piston etc Pdi barrels and springs are good, I use a pdi 6.05 barrel in my vsr AA hop units are very good
silver145 Posted September 11, 2016 Author Posted September 11, 2016 Have a look on airsoft pro (or aspuk, it's the same stuff) for a 90 degree trigger, cylinder, piston etc Pdi barrels and springs are good, I use a pdi 6.05 barrel in my vsr AA hop units are very good I have looked at the ASPUK kit and it basically is about the same price once converted (JPY to GBP) - for some reason in the UK they put a large premium on the parts! E.G Taiwan gun cm.701b = £75, patrol base = £130 Because of the price i'd rather go for "the" brand as if i ever do strip/sell it wont be as much of a loss haha although i will break it before then! Any tips on nub/hopup you use? CHeers
Supporters sp00n Posted September 11, 2016 Supporters Posted September 11, 2016 Have a look here http://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-vsr-and-mb02-3-7-9... I use a maple leaf 75 degree monster if I remember correctly
silver145 Posted September 13, 2016 Author Posted September 13, 2016 Have a look here http://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-vsr-and-mb02-3-7-9... I use a maple leaf 75 degree monster if I remember correctly Thanks for this. I ordered both the 75 monster and the autobot 70
Recommended Posts
Archived
This topic is now archived and is closed to further replies.