ronin677 Posted July 13, 2016 Share Posted July 13, 2016 Hi all. I am fitting my mancraft system to my VSR clone at the moment and have hit a snag. I have an Airsoft Pro hop up unit fitted and the air nozzle from the Mancraft system is too wide to go into my AirsoftPro hop unit. Does anyone know how to get around this probem without ditching my AirsoftPro hop up? Link to comment Share on other sites More sharing options...
Supporters sp00n Posted July 13, 2016 Supporters Share Posted July 13, 2016 Sorry mate, but I think this is a common issue (sure someone has posted about this in the vsr page on Facebook) I personally have an action army hop with my mancraft kit Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted July 13, 2016 Supporters Share Posted July 13, 2016 That's why the AP hop comes with its own cylinder head. Definitely not good if you're using a Mancraft SDIK. I'd probably say your going to have to ditch the AP hop bud Link to comment Share on other sites More sharing options...
Hef Legend Posted July 13, 2016 Share Posted July 13, 2016 AA hop all the way! Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted July 13, 2016 Root Admin Share Posted July 13, 2016 Yeh, get the Airsoft Pro one on the classified ans switch to the AA one Link to comment Share on other sites More sharing options...
ronin677 Posted July 14, 2016 Author Share Posted July 14, 2016 Good news Michal at Mancraft assessed the dimensions of my AirsoftPro Hop unit and came up with an alternative cylinder head to fit my Mancraft system At only approx £16, that was a cheap fix. This company, Mancraft, is fantastic and so willing to help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.