Can anyone identify this M9?

[NickM]

So I picked this up cheap with a leak free mag and a suppressor with an extended barrel (although it appears the surpressor doesn't match the pistol as the inner barrel doesn't touch the inner barrel in the suppressor). After giving the slide a really good clean and oil it fires really nicely, without the supressor. Problem is I don't really know what make it is and if parts like mags are interchangeable. The grips have dragons in the circle but there are no other markings, other than "Made in Taiwan" stamped on the mag which may or may not be one that came with the gun originally.

 

Cheers

 

 

[proffrink]

Plastic slide? Can't tell from the light and those marks. I'm guessing not if it says 'made in Taiwan'.

[NickM]

Sorry should have added it in the first post. It's a metal slide and there are no written markings on the gun or the mag other than the "Made in Taiwan"

 

About the only plastic things seem to be the grips and some of the internal parts.

[Sitting Duck]

Early Stti SRC HFC m92 non blowback

 

star on mag sounds about right

 

later became the GG104 & GG105 (no thread on later models)

 

that is my guess an early SRC or rebrand m92

 

ahh sod it I was close - this might be nearly the exact type or model:

 

http://airsoftshop.cz/product_info.php/cPath/385_386/products_id/2051

 

but if ain't 101% exact look through this list and see what else it might be:

 

http://airsoftshop.cz/index.php/cPath/385_386

 

Damn it I need to get out more

[Monty]

http://www.badgertac.com/products/airsoft-1/kj-works-m9-assassin-with-metal-silencer.html

[proffrink]

No rail. Also, AFAIK the KJ Works ones have always had a small trade somewhere. On that one according to Google it's on the other side where the trigger guard is.

[Sitting Duck]

it is something like the stti or KJ Monty posted...

they are ever so slightly different to pic under barrel/rail but nigh on same meat different gravy....

 

what you need to do is take close ups of mags from a few angles

coz the lips n stuff are a tad different on some m92 mags

[proffrink]

It's going to be the STTI though because KJW have always marked their guns in some way even if it's just a tiny stamp on the trigger guard.

[Monty]

didn't notice the rail.. Huh, the lower receiver could've been changed at some point in its life to a railed receiver.

[Mack]

Looks identical to my old KJW M9

[proffrink]

Did your old KJW M9 have a stamp on the trigger guard?

[GiantKiwi]

It's an STTI, and FYI the STTI one was made by KJW

 

STTI is like Cybergun/ASG/Echo 1/etc, they rebrand other manufacturers guns.

[Mack]

Did your old KJW M9 have a stamp on the trigger guard?

 

honestly cant remember, was my first pistol almost 5 years ago. Had the same grips and silencer as the OP's though.

[Sitting Duck]

Thought Stti were SRC which gets rebranded to HFC and so on & so on....

(well going by the GC (co2) & GG (green gas) 104 & 105's)

 

which TWG will be restocking these soon and their cheap Green Gas mags

£13:46 gun & mags about £7:28

 

http://www.taiwangun.com/en/gas-guns/m92f-m9-heavy-weight-gas-pistol-replica-stti?from=listing&campaign-id=19

http://www.taiwangun.com/en/gas-guns/m92f-m9-vertical-heavy-weight-gas-pistol-stti?from=listing&campaign-id=19

 

http://www.taiwangun.com/en/gas-pistol-magazines/m9-magazine-stti?from=related&campaign-id=6

 

OP needs to very closely compare mags in great detail but they might work

just remember seeing on airsoft cz site something abould old & newer stti models

also some kjw mags "may" be different

the blowback mags are deffo different but like I said pay close attention before ordering one

 

heck tbh - wait a week or so when they come in....

order a gun & a couple of mags - less than £30 for gun with a total of 3 mags

if they work in the OP's gun great he can have a spare mag or two

or if not then at least he has a cheap non blowback pistol with extra mags

(better than buying just a couple of mags and they not fit - £6 more and get gun with mag - bargain)