battery size for trijicon acog

[Robbi3b]

I've just bought a second hand trijicon acog does anybody know what size battery fits many thanks robbie

[Baz JJ]

Are you sure you need one ?

 

My ACOG uses Tritium.

 

I think only the 4x32 LED model needs a battery which is an Alkaline AA battery.

 

I guess Chinese Clones can be anything ?

[Robbi3b]

These are the pictures I've taken of it

[Sitting Duck]

Get down to poundland 99pstore

 

by a sheet with all them watch batteries on there.....

just above the mount rail there is compartment - shove in 2 cells

(well open it up and see if there are any dead ones in there - but most likely 2 x 1.5v)

 

EDIT - Mack is correct - I f*cked up in this post it is NOT AG13 - these went in my Eotech

I used AG3's in the ACOG - way too small diameter wise but did the job to test it out

my bad for saying you need AG13's - they will never fit in there - just checked

 

Correct battery is L936 / LR45 / 394A / AG9 - cheers Mack

 

for what its worth here is a chart with info on sizes/codes/different numbers etc.....

 

 

Seems like me using AG3 is 7.9mm diameter instead of 9.5mm diameter - same thickness 3.6mm but smaller capacity

 

So seems like I should also order up some L936 / LR45 / 394A / AG9's

 

Thanks to Mack - soz for me talking out of my duck's ar$e once again - my bad

[Mack]

Almost all of the 1x32 acog red dots use LR936 cell batteries. Can be bought on ebay cheaply.

 

http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=LR936&_sacat=0