SuicidalBarrelRoll Posted March 26, 2014 Share Posted March 26, 2014 I recently bought a rail from eBay, and was fully aware that it came fully intact but had nothing to make it fit with a delta ring , its just a quad rail with no rear fittings. Could anyone point me to a part to get this to fit on the delta ring? Many thanks Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 26, 2014 Supporters Share Posted March 26, 2014 Any chance of a picture? Link to comment Share on other sites More sharing options...
SuicidalBarrelRoll Posted March 26, 2014 Author Share Posted March 26, 2014 I'm on mobile atm...image a quad rail handguard with no d ring attachment at the back its navy seals marked Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 26, 2014 Supporters Share Posted March 26, 2014 As far as I'm aware, the RIS fits over the inner nut on the delta ring, unless it's a free float type that needs a special bolt on style receiver attachment? Link to comment Share on other sites More sharing options...
CaptainSwoop Posted March 28, 2014 Share Posted March 28, 2014 Need a picture Link to comment Share on other sites More sharing options...
Supporters Rock-climby-Dave Posted March 28, 2014 Supporters Share Posted March 28, 2014 It either is a straight replacement for the standard handguard and fits in the same manner, pulling the D ring back, or it is free float and requires the complete removal of the old D-ring and replacement with the correct fitting. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.