Batteries in an MOE Handguard?

[Shinobi]

Hey guys im looking at a Magpul MOE Handguard, and I wanted to know what batteries will fit. What types (Crane,Mini,Twin,Stick etc) will fit? Also, what MaH will I need to last an entire day safely? 2000MaH+? Finally, will any of these specific batteries fit?

http://www.actionhobbies.co.uk/3300-mAh-9-6v-Crane-Large-Pack-For-AEG-Guns_ATZDX.aspx#.UYkc2LUe2IU

http://www.actionhobbies.co.uk/1600-mAh-9-6v-Ni-MH-Mini-Pack-AEG-Guns_APF0Q.aspx#.UYkc4rUe2IU

http://www.actionhobbies.co.uk/2000-mAh-9-6v-Twin-Leg-For-AEG-Guns_A1AH4Q.aspx#.UYkcyLUe2IU

http://www.airsoftworld.net/vp-9-6v-1600mah-nimh-mini-battery.html

http://www.airsoftworld.net/vp-9-6v-1600mah-nimh-crane-stock-battery.html

Thanks!

[jcheeseright]

Mini fits nicely, unless you're mega trigger happy then a 1600mah battery will last all day.

[TPI]

Hey,

 

I Have a Moe HandGaurd and i Can say a Mini 9.6V Brick will fit and a 8.4V Mini Crane should fit with some Jiggling.

 

I'm Selling 3 Mini 8.4V's for £15 1 Is a Golden Eagle 1100Mah Vapex 1500Mah + a Zeroone 1500Mah all converted too Dean's so if you Just switch your Rifle and Charger to Dean's (60P Upgrade!)

[JRTIGHE]

LiPos and minis fit perfectly. I've got a large 3300mAh battery in my M14 stock and that lasts me a full day comfortably.

[Shinobi]

Hey,

 

I Have a Moe HandGaurd and i Can say a Mini 9.6V Brick will fit and a 8.4V Mini Crane should fit with some Jiggling.

 

I'm Selling 3 Mini 8.4V's for £15 1 Is a Golden Eagle 1100Mah Vapex 1500Mah + a Zeroone 1500Mah all converted too Dean's so if you Just switch your Rifle and Charger to Dean's (60P Upgrade!)

What does deans do?

[Shinobi]

Thanks for your replies guys! I think i'll get one or two 9.6v 1600MaH mini's, unless you know of any 9.6v 2000Mah+ Minis?

[TPI]

This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's

 

http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg

[Silent7Sniper7]

personally i'd suggest getting a Li-Po, 7.4v if your trigger happy & use high-caps get a 1450MaH at the minimum.

[Shinobi]

personally i'd suggest getting a Li-Po, 7.4v if your trigger happy & use high-caps get a 1450MaH at the minimum.

Ok, cheers Mate ;D

[Hav0c]

I have an MOE handguard and i use a 7.4v,2600 mAh, 25c, 16Wh made by VP Airsoft and it lasts me a full day (I usually use just under 2000 bb's) on a 2 hour charge. Make sure you get a proper LiPo smart charger for one though as you risk burning it out.

 

Oh, and the battery fits snug as a bug in a rug

[Shinobi]

This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's

 

http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg

 

 

This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's

 

http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg

Ok, thanks for telling me!

[Kaza66]

I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ?

 

Thanks

[Shinobi]

I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ?

 

Thanks

 

 

I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ?

 

Thanks

Should do I think... Might be able to find cheaper deals elsewhere... ;D