-Marksman Posted April 7, 2013 Share Posted April 7, 2013 I have looked to remove the restrictor from my well m70 but i cant seem to find it, i chrono'd the gun at under 300fps which is nowhere near the 480-50fps the gun is supposed to be able to do so the restrictor must be there. I have looked at the nozzle countless times & have not been able to see any parts that look like they can be removed. Anybody help? Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 7, 2013 Supporters Share Posted April 7, 2013 Or the retailer may have just put up a guess at the fps figure. Chances are that's what's happened. Link to comment Share on other sites More sharing options...
-Marksman Posted April 7, 2013 Author Share Posted April 7, 2013 ill buy a new spring & see if that has any effect Link to comment Share on other sites More sharing options...
Supporters Rock-climby-Dave Posted April 7, 2013 Supporters Share Posted April 7, 2013 it should be a small screw in the end of the nozzle, usually brass with a flat head screwdriver tip to it. Not all spring rifles have them, mind you. Link to comment Share on other sites More sharing options...
-Marksman Posted April 7, 2013 Author Share Posted April 7, 2013 it should be a small screw in the end of the nozzle, usually brass with a flat head screwdriver tip to it. Not all spring rifles have them, mind you. yeah theres nothing like that there, i will get a new spring & some more bits from aspuk Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 7, 2013 Supporters Share Posted April 7, 2013 The fps on the site may also have been measured using a .12g bb rather than the usual standard of 0.20g Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.