Exeth Posted September 28, 2012 Share Posted September 28, 2012 Hi there I took apart my L96 trigger and now i cannot get the thing to cock. I have read several different guides but the most i have managed to get was a single cock back then it woudlnt fire until i took the trigger apart again. If anybody could advise me on the spring and seer positions that would be fantastic. P.s i know my seer springs are shaped differently but they have always been that way, when the gun was working. Regards Link to comment Share on other sites More sharing options...
Silent7Sniper7 Posted September 28, 2012 Share Posted September 28, 2012 why the hell did you take it apart? The standard trigger system is a b**** to put back together, thats why i am buying an upgraded version Link to comment Share on other sites More sharing options...
Exeth Posted September 28, 2012 Author Share Posted September 28, 2012 The mag kept causing the barrel to JAM and/or falling out when i fired. I know..nothing to do with the trigger assembly but i fixed that problem now i have this one Link to comment Share on other sites More sharing options...
Silent7Sniper7 Posted September 28, 2012 Share Posted September 28, 2012 honestly your better off getting a new better quality trigger, the standard one wont last very long Link to comment Share on other sites More sharing options...
Alexb111 Posted September 28, 2012 Share Posted September 28, 2012 Yeah, get a metal trigger unit, there not very expensive and will just be simpler and probably cheaper than trying to put that one back together: Golden rules of L96: Don't open the trigger unit.. Don't open the hop-up. Link to comment Share on other sites More sharing options...
Silent7Sniper7 Posted September 28, 2012 Share Posted September 28, 2012 Yeah, get a metal trigger unit, there not very expensive and will just be simpler and probably cheaper than trying to put that one back together: Golden rules of L96: Don't open the trigger unit.. Don't open the hop-up. how I regret opening my hop-up :/ eventually fixed it Link to comment Share on other sites More sharing options...
Supporters Liam Porter Posted September 28, 2012 Supporters Share Posted September 28, 2012 How do you open the hop unit? Isn't it just one piece? Link to comment Share on other sites More sharing options...
Supporters Airsoft-Ed Posted September 28, 2012 Supporters Share Posted September 28, 2012 How can you change the nub if you can't open the unit? Link to comment Share on other sites More sharing options...
Exeth Posted September 29, 2012 Author Share Posted September 29, 2012 Yep i ordered a metal trigger unit but it wont be here for 2 weeks and i would like to keep this one as a spare. Has nobody successfully put one back together? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.