Jump to content

maintaining a we scar


joshcowin
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

hi their just bought a we scar and i know how much maintance they need but what oil would you reccomend for metal against metal as silicone lube dosent last long with metal.thanks josh

Posted

I don't know what firearm specific lube would be good, but I would think automotive brake paste would be ideal. Not 'copper slip' as the metal content is likely to cause wear, but one of the newer generations of brake paste. Advantage of it is it's designed to work at very high temperatures (far higher than any airsoft gun should be reaching) without breaking down and running off of what it's meant to be lubricating. I may very well be talking out my arse when I recomend it for this application, but just a thought.

  • Supporters
Posted

GBBR internals are more likely to suffer from very low temperatures than high ones, since the gas cools as it expands.

 

I always used regular silicone lube and it worked fine, though I think a lot of the time you don't need to worry about lubing the mechanism as if you're using green gas, the lube in the gas will do it for you.

 

If you use anything oil based then you'll bugger all the o-rings in the mechanism and end up with a FUBAR gas system, hop rubber and magazines.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...