Help with Mp5 + H&K 416

[fellowz23]

Hi everyone, just need a lil bit of help with my guns, my mp5 is two-tone at the minute but asoon as i become UKARA Registerd or if im allowed to replace the two-tone only when im at a game i want a metal body but not sure what will fit my JG Mp5a4.

 

Will this fit?

http://www.fire-support.co.uk/product/clas...-mp5-metal-body

 

Or this?

http://www.fire-support.co.uk/product/ics-...et-aluminum-mp5

 

Also same kinda thing with my 416 except its metal allready but the stock and front is two-tone but wana keep them like that and get replacement black parts, now i know its practicly a m4 but can i buy any m4 parts like stocks, barrels, front RIS/RAS, mags and grips and will they fit?

[Matt!]

for the 416

 

stock should fit from an m4

 

RIS will have to be a 416 one.

[Nutster]

as above however the ris on the 416 is (at a guess) just painted so with a bit of work you could take the TT paint off, and i think the first of the two bodies you linked for mp5 should fit

[youngsyp]

The stock on the 416 now is a 417 style crane stock. DBoys market a very similar one at a very good price.

 

With regards to the RIS, it will be expensive to replace it. You're better off removing the paint that's on it now. If you're careful, the original black paint will stay in place, removing the need to re-paint.

 

Paul

[fellowz23]

Thanks for all the help realy apprichiate it.

[fellowz23]

Sorry also forgot to ask, my Mp5's gearbox has got very noisy and winey latley so i took it apart and the bevel gear is showing alot of wear on the edge, so was wondering if this gearset will fit since it is from JG?

 

http://www.airsoftworld.net/airsoft-guns/g...bevel-gear.html

 

Thanks again

[Rock-climby-Dave]

Should fit, but if its the bevel gear, and ONLY the bevel showing wear, just replace the bevel one with a sweet-Arse one. all you need to check is that it will fit (email sites)

 

and then make sure your motor and gearbox are aligned and the correct distance apart. the whining you are hearing is the motor and the gear connected directly to the motor (another bevel) spinning against the bevel gear and wearing it down without much spinning of the gearbox taking place.

 

This is something a Professional should look at. Ask a local airsoft shop to look at it for you, they should replace the knackered gear and (from my experience) give everything a good going over and clean it up.