Search the Community

My son has been using ExFog for over a year now and is very happy apart from that, he hasn’t found a good solution for mounting the tubes to his googles yet (but then he isn’t trying very hard either). I’ve recently received the Novrtisch Antifog Unit 2nd Gen and can now actually compare the two. First of all they both will do the job just fine, it is more about the features and the attachments they come with. Usability: The ExFog uses one button to toggle between different modes, low, medium, max, off while the Antifog has an analogue potentiometer aka knob and a ‘max’ button which goes to full power for 30 seconds to defog the glasses and then goes back to the current mode. IMHO the Antifog wins the usability. Having to toggle through the different modes is a bit annoying, having an analogue knob is more convenient. Tubing: The Antifog comes with green tubes so that is nice but they are a bit on the soft side and it is easy to get kinks. On the other side because the tubing is softer movements don’t tend to pull the tubings out of the glasses but just kink them. I guess that is a benefit. The ‘T’ attachment that comes with the Antifog has IMHO a more solid connection (it doesn’t disconnect as easily) as the magnetic adapter you now get with the new ExFogs but the ExFog connectors are more versatile. ExFog wins the attachments unless you have a google where you can actually use the T connector. Then the Novritsch adaptor is superior. Overall I would say ExFog wins the tubing one but time will tell. I haven’t been able to play with my Antifog yet thanks to a dodgy foot. The flexible tubing might not be an issue at all. Attachments: The Antifog only comes with some Velcro stickers, that’s it. I bought the Novritsch bonie with it which has Velcro on the back so that is not a problem and most helmets have Velcro patches on the back but if I play with my Barrett then I have a problem. Luckily I have all the attachments from my son’s ExFog. That comes with all the Velcro stickers and a head band so that you can wear the unit without anything. That head band just has a Velcro patch on so it works with the Antifog as well. The winner here is clearly the ExFog. Summary So even though the ExFog wins two out of the 3 categories here I would choose the Antifog on the field just because of the usability issue. The one complaint my son has with his ExFog is that his tubes come undone from his goggles. He routes them inside his helmet and they come straight down and he pushes them through holes on the top of his goggles. The tubes are quite stiff to avoid kinks but it also means that any shear force is likely to pull them out while some softer tubes might just kink for a bit and then relax again. Is anyone playing with Novritsch Antifog and can give their feedback on how the tubes behave?

My Nov unit with my new '100% real' aliexpress M32s is pretty audible but not to the point where I can't hear anything else. Would have to directly compare to an ExFog unit to know for sure, though - and it's not like I've got the best setup regardless (it's on a exfog headband, and it was the first time running earpro ever so my setup was all over the place) No idea about the aliexpress fog units however, but considering the price of them it might end up being a valid choice if you're not running sound amplification/reduction, exactly like you said.

Noise is the biggest turn off for me - I may take a punt on payday. For reference; my Exfog is in a pouch, velcro'd to my helmet, and my hearing protection picks up a noticeable constant vibration/low humming noise from the fan running. I can't imagine running anything that's much louder than what I use now. For those not using active hearing protection, could be worth a chance.

Good to hear that the kinky tubes don't really cause a problem. In that case they might actually be a 'positive' over the more rigid tubes from ExFog. I saw the trick with the spring on a YouTube video (https://youtu.be/0oXgzxNgdJE?si=OvnlCnOwSRhGrDK1) Nice idea but will only try it if needed. 'Premature optimization is the root of all evil.' Donald Knuth

I personally use the ExFog headbad underneath my boonie with the Novritsch unit, as I couldn't get it to sit right via velcro and it kept doing weird things. Haven't ever had a problem with the lines, even if they're very soft and kink easily they still provide plenty of air to the magnetic T-connector in the middle of the goggle. On Sunday's game just went it was the first time wearing earpro and even with them pressing down on the lines I didn't fog at all, but if you're worried about line kinking being a problem you can always measure the inside of the rubber tube and get hollow spring tube that's just smaller to route inside to stop it from bending as easy while still being flexible enough in a pinch.

I've found a pair of goggles that I REALLY like, however they will definitely fog up. The Novritsch Antifog unit requires you to cut a section out the top of the goggles. How does the ExFog attach?

My airsoft headgear journey has followed the Michael Fassbender "Perfection" meme, three different things until perfection was achieved. I prefer real head protection: Started with a Viper Tactical baseball cap, occasionally using a Jack Pike camo one, and both suffered with the same problems... too thin / fell off too easily / peak would catch on things / BB's magically find any gaps. I said real head protection: Then a good FMA ballistic helmet, a very large one that fitted my melon head. I was very happy, I could mount an ExFog, but then being sneaky came along and it didn't fit the bill (but has been passed to my son who happy with it). Perfection: Then onto a boonie for trying to pretend to be a bush or a clump of bracken (with added mesh etc. and my ExFog). But, ignoring the camo side of things, I found that it was "perfection" in that... it's light on my head / sits well with my Delta Mike / the fabric has some "give" rather than a restrictive helmet / it's so easy to store in my kit bag / it has a wire brim so I can mold it to by head (no BB gaps) / the material is thick enough to protect me but I will notice hits. I love my "UF PRO Striker Gen.2 Boonie" and need to buy another to craft ready for winter.

I can still fog Revision's Desert locusts with the thermal lens and their anti-fog wipes, not so voodoo magic. It's all down to humidity and body heat, these things are all designed for environments with less than 50% average relative humidity, UK averages at around 50 - 60% in the summer and 80-90% during spring and winter. ExFog works well, its less expensive than the Novbitch one, and you can either fuck about with the magnetic end bits or just point the tubes in roughly the right direction - just don't forget to charge it the night before, because they don't hold juice very well (this applies to both ExFog and Novbitch ones).

Alternative to the Novritsch system is ExFog (you can get it from PatrolBase). My son uses it and you can hardly hear it. I am thinking of getting one myself and then design and 3d print a bracket for my Wiley-X which holds the tubes in place. I had bad problems with fogging at first as I was wearing googles over my normal glasses. Changing to contact lenses helped a bit. So did adding some additional ventilation holes from the top on my googles. The Wiley-X are ok as well as long as I don’t have the glasses touch my forehead. If I use the strap instead of the normal arms the lenses are the most secure but are fogging up like mad. It is for this setup that I am considering the ExFog. It is basically a balance act between no fogging and best eye protection. Ideally you would want both. I personally would not use mesh masks. I’ve got a little shooting range setup in my loft and I have lots of brocken BB fragments lying around. The danger comes when you get shot from close range as that’s when BBs tend to shatter.

Easiest and cheapest option: Revision Anti-Fog wipes. They're witchcraft. Breathe on your goggles to steam them up and wipe with the cloth a few times. They take some effort to steam up after that. Using a Delta Mike snood appears to help me because it doesn't trap heat like other face protection. Finally, I use an Exfog unit secured to the back of my helmet with the tubes ran on the inside of the lid, into the goggles. Novritsch has his own type of Exfog unit if you can't find one in stock. I get condensation on the inside of the goggles but rarely do I get actual fogging.

Did a search of the site to see if any news on the pre-order delivery and was surprised these had not been posted. https://trittech-us.com/ Looking at the youtube channel ballistic testing seems good and the antifog look amazing. From someone that can fog a DYE mask I use an ExFOG like system but its just a PITA with the tubes so most of the time I wear my heroshark mesh but I have astigmatism and in low light suffer. Fingers crossed they turn out as advertised.

I am surprised. I just remember one video where they shot BBs at the ExFog and the Novritsch one and the Novritsch one broke. They must have improved on that.

Confirmed, I've tried many other potions, including CatCrap, and Revision wipes come out way ahead. They're actually quite expensive when bought in small numbers, but can sometimes be found in bulk buys that will last for years, given that you can reseal the wipes and use them for several game days. Double confirmed, even with dual pane lenses and Revision wipes, I sometimes need to turn on a fan. ExFog, a clone, or DIY something with a PC/3D printer cooler fan, some tubing, and your battery and switch of choice.

Outstanding, that magnetic attachment looks like a great idea. Much better than my DIY fan goggles solutions where I just shove the tube in a hole cut in the side. Oh, even better, the Ex-Fog couplers can be bought separately, for anyone wanting to bodge up their own system. https://www.patrolbase.co.uk/exfog-universal-magnetic-goggle-adapters-set-of-2

I've done something very similar, but with the exfog and for sniping with a full-face veil. https://www.instagram.com/p/C4atDp7t3gB/?igsh=MWhvMThnb2d2OXNkaQ== I've got a couple of different Setups, be it for glasses or goggles, with different mounting styles. https://www.instagram.com/p/C7wodvjtlL2/?igsh=eWpoZWN5NjJpY2lq

I have an Exfog. It has two open ended tubes that I just stuff into the top of my goggles, one each side. I had already pulled the foam off for better ventilation. The rubber that the foam was attached to is soft enough to push aside and slide the tube in and then route it through my helmet and cut to size. I bought the velcro pouch and just stuck it to the back of my helmet under the bungees so it didn't go anywhere. I believe the tubing is just some generic PVC tubing used in aquariums and such but I can't remember what size it is. I pair my Exfog with some Revision anti-fog wipes which are cheap as chips and last for months at a time as long as you don't get it dirty and re-seal it. Only downside i've ever found is that when using active hearing protection, that's mounted to the helmet, it'll amplify the vibration from the fan/motor and be really annoying.